GREEN SOUL Zodiac Pro High Back Chair Instruction Manual
AVAILABLE COMPONENTS
ASSEMBLY INSTRUCTION
Step 1 :- Getting The Base Ready (Place the Base Cover over the Base Stand and insert the Gas lift into the center of the Base)
Step 2 :- Unscrew the 6 screws pre-attached with the Seat using the Allen Key (3 on each side)
Step 3 :- Place the Armrest and Semi-fix the 6 Screws to have the Armrest in place
Step 4 :- Securely tighten the screws in place with the given Allen Key
Step 5 :- Unscrew the 3 screws pre-attached with the Back using the Allen Key
Step 6 :- Keeping the Back downwards Insert the Back into the slot between the Mechanism and Seat
Step 7 :- Once the holes of the Back and Seat are aligned semi-fix the Screws to have the Back fixed in place
Step 8 :- Securely tighten the screws in place with the given Allen Key
Step 9 :- Connecting the Upperbody and Base
Step 10 :- Flip the Chair upright after connecting the Upperbody and Base
FEATURE
- ADJUSTING THE SEAT HEIGHT
- SEAT SLIDER
- BACKREST LICKING
- BACKREST TENSION CONTROL
- 2D ADJUSTABLE ARMREST
- ADJUSTABLE LUMBAR SUPPORT
Cleaning and Maintenance
- Periodically clean the seat cover using a vacuum cleaner. Use the correct attachment for vacuuming upholstery. Use the setting for upholstery (low suction).
- Use a dry sponge to remove dirt.
- If required, use a slightly damp cloth to clean heavily soiled areas, then wipe dry using a dry cloth.
- Occasionally, thoroughly wipe the frame using a slightly damp cloth. Then dry the frame using a dry cloth.
- Do not use strong cleaning agents or abrasives.
- Do not use the chair unless all screws are securely tightened. Screws and joints hould be re-tightened regularly.
Safety and Compliance
- Use care when handling.
- Assemble the chair on carpet to prevent scratching the chair.
- Do not use power tools.
In case of any manufacturing defects, please contact us at +91 844-8444-695 I [email protected]
Monday to Saturday: 9:30 AM – 6 PM
