Comelit Ipswsp24a 24 Non-standard Spoe 24 Vdc Ports Switch User Manual

IPSWSP24A 24 Non-Standard SPOE 24 VDC Ports Switch

Product Information:

The Power Switch 24PoE+2G is a network device that supports the
transmission of data signals. It has 24 non-standard SPOE 24 VDC
ports and 2 uplink ports for cascade connection to extend the
network. The product, with the article number IPSWSP24A, comes with
fixing brackets for mounting in a rack cabinet.

Technical Specifications:

  • Power Switch: 24PoE+2G
  • Speed: 10/100/1000 Mbps
  • Ports: 24 non-standard SPOE 24 VDC ports, 2 uplink ports
  • Article Number: IPSWSP24A

Package Contents:

  • Fixing brackets for mounting the device in a rack cabinet

Product Usage Instructions:

  1. Mounting the Device:
  • Use the screws supplied to mount the device in a rack
    cabinet.
  • Connecting Devices:
    • Use the SPOE ports to connect the following devices: art.
      6804W, 6814W, 6844W, 6854W, 6944W, SHMAN010W.
    • For variant with second external unit:
      • Connect the external unit using the SPOE ports.
      • Use the provided wiring diagram for proper connections.
      • Maximum cable length for local door-opener button: 20m.
    • For variant with PoE standard switch:
      • Connect the devices mentioned above using the SPOE ports.
      • Use the provided wiring diagram for proper connections.

    For any further assistance or information, refer to the
    certified management systems website: www.comelitgroup.com

    EN TECHNICAL MANUAL
    Power Switch 24PoE+2G
    10/100/1000 Mbps
    24 non-standard SPOE 24 VDC ports switch art. IPSWSP24A

    Warning

    · This Comelit product is designed and manufactured for use in the creation of audio and video communication systems in residential, commercial, industrial and public buildings.

    · All activities connected to the installation of Comelit products must be carried out by qualified technical personnel, with careful observation of the indications provided in the manuals / instruction sheets supplied with those products. The product must be installed to the highest standards.

    · Disconnect the power supply before carrying out any operations on the wiring.

    · Use wires with a cross-section suited to the distances involved, observing the instructions provided in the system manual.

    · We advise against running the system wires through the same duct as power cables (230V or higher).

    · To ensure Comelit products are used safely: carefully observe the indications provided in the manuals / instruction sheets; make sure the system created using Comelit products has not been tampered with / damaged.

    · Comelit products do not require maintenance aside from routine cleaning, which should be carried out in accordance with the indications provided in the Manuals / Instruction sheets. Any repairs must be carried out: for the products themselves, exclusively by Comelit Group S.p.A., for the systems, by qualified technical personnel. Do not use alcohol or aggressive products for cleaning purposes.

    · Comelit Group S.p.A. accepts no liability for any purpose other than the intended use, or failure to observe the indications and warnings contained in this manual / instruction sheet. Comelit Group S.p.A. reserves the right to change the information provided in this manual / instruction sheet at any time and without prior notice.

    · The manufacturer, Comelit Group S.p.A., hereby declares that this equipment conforms to the applicable directives. The full EU conformity declaration is available on the web page for the product.

    ·

    In accordance with art. 26 of Italian Legislative Decree dated 14th March 2014, no. 49 “Implementation of directive

    2012/19/EU on Waste Electrical and Electronic Equipment (WEEE)”, the “crossed-out wheelie bin” symbol indicates

    that at the end of its useful life, this product must be separated from other waste before collection for disposal. The user

    should therefore take the exhausted appliance to suitable local collection centres for waste electrical and electronic

    products. As an alternative to handling this process yourself, you can take the appliance to your local equipment dealer

    when purchasing a new equivalent product. Electronics dealership businesses covering an area of 400 m² are also obliged

    to accept waste electronic products smaller than 25 cm for disposal, without any obligation to purchase. Suitable separated

    waste collection for the subsequent reuse of the appliance sent for recycling, processing and environmentally conscious

    disposal helps to avoid potential negative effects on the environment and human health, and encourages the reuse and

    recycling of the materials used in the construction of the appliance.

    Package contents

    2

    Description
    The product supports the transmission of data signals through network devices. The SPOE ports provide the power supply for the extensions connected. The uplink ports allow cascade connection to extend the network. The art. IPSWSP24A provides:
    · 24 SPOE high speed ports (10/100Mbps) · 2 uplink ports (100/1000Mbps) · Wide voltage power supply input (110-240 Vac) · Maximum power available 24W for each POE port
    · Use SPOE ports to connect the art. 6804W, 6814W, 6844W, 6854W, 6944W, SHMAN010W. · Connections among uplink ports and 1440 only with Comelit red cable 1449.

    Technical specifications

    Product name AC Power supply input Max transmission distance Bandwidth Port description DC Power supply Output Product size (L × W × H)

    24 non-standard SPOE 24 VDC ports switch 110-240 Vac 50-60 Hz 100 m 12 Gbps 1-24 port for SPOE power (10/100Mbps) / 1-2 uplink port (100/1000Mbps) 24V 10.4A 250W 270mm × 180mm × 44mm

    Fixing brackets for mounting the device in a rack cabinet

    1
    2
    use the screws supplied
    3

    Basic wiring diagram

    110-240 V 110- 240 V

    6804W 6844W
    6814W 6854W

    6944W SHMAN010W

    -+

    1595

    100-240 V

    TX
    -+ +

    IPSWSP24A

    IPSWSP24A

    Use SPOE ports to connectthe art. 6804W, 6814W, 6844W, 6854W, 6944W, SHMAN010W.

    ORANGE WHITE ORANGE GREEN WHITE GREEN

    R

    C

    T GND SE+ NO NC O

    E SE-

    M

    V

    V +

    +

    TX TX RX RX
    -+-+

    UT8020 UT9200

    20 m max. Local door-opener button 4

    Variant with second external unit

    110-240 V
    110- 240 V
    6804W 6844W
    6814W 6854W
    6944W SHMAN010W

    IPSWSP24A

    IPSWSP24A

    · Use SPOE ports to connect the art. 6804W, 6814W, 6844W, 6854W, 6944W, SHMAN010W.
    · Connections among uplink ports and 1440 only with Comelit red cable 1449.

    ORANGE WHITE ORANGE GREEN WHITE GREEN

    TX
    -+ +

    1441

    -+

    L

    N

    VV

    1440

    +-

    IN IN 12

    OUT OUT OUT OUT 1234

    BROWN & WHITE BROWN BLUE & WHITE BLUE ORANGE WHITE ORANGE GREEN WHITE GREEN

    V V TX
    -+-+ +

    SE SE
    -+

    -V
    NC C NO

    R T

    D

    EO

    CN 1

    4899M

    20 m max. Local door-opener button 5

    R

    C

    T GND SE+ NO NC O

    E SE-

    M

    V –

    V +

    +

    TX TX RX RX -+-+

    UT8020 UT9200

    Variant with PoE standard switch

    110-240 V
    110- 240 V
    6804W 6844W
    6814W 6854W

    6944W SHMAN010W

    POE STANDARD
    SWITCH

    IPSWSP24A
    IPSWSP24A

    Use SPOE ports to connect the art. 6804W, 6814W, 6844W, 6854W, 6944W, SHMAN010W.

    BROWN & WHITE BROWN BLUE & WHITE BLUE ORANGE WHITE ORANGE GREEN WHITE GREEN

    V V TX
    -+-+ +

    SE SE
    -+

    – NC C NO V

    R T

    D

    EO

    CN 1

    4899M 20 m max. Local door-opener button
    CERTIFIED MANAGEMENT SYSTEMS

    www.comelitgroup.com
    Via Don Arrigoni, 5 – 24020 Rovetta (BG) – Italy

    R

    C

    T GND SE+ NO NC O

    E SE-

    M

    V –

    V +

    +

    TX TX RX RX -+-+

    UT8020 UT9200

    1ª edizione 04/2023 cod. 2G40003160

  • Documents / Resouces

    Download manual
    Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


    Related Manuals