Lamax Noise Comfort Anc User Guide

LAMAX Noise Comfort ANC User Guide

Controls

On	Hold for 2 seconds
Off	Hold for 5 seconds
Activate ANC	Press
Play / Pause	Press
Next / Previous Track	Hold / hold
VOL + / VOL –	Press / press
Answer / End Call	Press
Reject Call	Hold for 1 second
Activate Mobile Assistant	Press twice

Turning On

Press for 2 seconds to turn on the headphones. This is accompanied by an audible notification and the blue LED lights up.

Pairing

1. The headphones automatically go into pairing mode the first time you turn them on. This is indicated by the LED alternately flashing red and blue.
2. On your device, turn Bluetooth on and locate and select LAMAX NoiseComfort ANC in the list of available Bluetooth devices. After successfully pairing, there is an audible notification.

If you have trouble pairing, remove your headphones from the list of paired devices in your smartphone. Turn off the headphones and then hold the button for 5 seconds. The headphones turn on and automatically go into pairing mode. Pair the headphones again as in Step 2 above.

Active Noise Cancellation (ANC)

Press the ANC button to turn on. When ANC is on, the green LED next to the charging connector is lit. To turn off ANC, press the button again:

• You can activate the ANC function in the same way without turning on the headphones.
• ANC especially suppresses deeper frequencies. Human voices and higher frequencies are minimally suppressed.

Turning Off

Press and hold the for 5 seconds to turn off the headphones.

Charging

To charge, connect the USB-C cable to the headphones and the other end to the 5V USB charger. The LED lights up red when charging and green when fully charged.

Parameters

Subject to printing errors. 

The latest version of the user guide can be downloaded here:
https://www.lamax-electronics.com/downloads/ lamax-noisecomfortanc/manual

References

• LAMAX Electronics | EN