Toy RC Robot Jr
Product Information
The Transforming Robot is a toy suitable for children aged 6 and
above. It requires 3 AA size batteries for the robot and 1 9V
battery for the controller. The toy can transform between a robot
and a race car. It has an on/off switch and buttons for forward,
reverse/automatic spin, and transforming modes.
Operating Instructions
- Carefully remove all items from the package.
- Lift the back of the toy upwards to access the battery
compartment. - Rotate lever (A) to unlock the battery door (B).
- Open the battery door and insert 3 AA size batteries in the
correct polarity shown (C). - Close the battery door and rotate the lever to close it
securely. - Use a Phillips screwdriver to unscrew the battery compartment
on the back of the controller. - Insert 1 9V battery into the controller following the correct
polarity. - Replace the battery compartment door and use a Phillips
screwdriver to screw it closed. - Switch both the car and remote buttons to the ON position.
- For best results, use the car on hard surfaces such as wood or
tile. - To operate the toy, press and hold the forward button for
forward movement. - To reverse or activate automatic spin, press and hold the
reverse/automatic spin button. - To transform the toy into a robot or a race car, follow the
instructions provided with the toy. - Do not operate the toy between modes.
Safety Precautions
1. Do not place hands on or near the back of the car during
transforming to avoid potential pinching.
2. Always follow the battery instructions and warnings provided
in the manual.
3. Keep this instruction manual for future reference.
Battery Warning
Follow these precautions to minimize the risk of fire, electric
shock, or injury:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver. - Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for
help.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment.
Important Information
Keep this instruction manual as it contains important
information for future reference. Please note that due to
continuous product improvements, the pictures in this manual may
differ slightly from the actual product.
The artwork and design of this manual are protected by US
copyright law and may not be reproduced, distributed, displayed,
published, or used for any purpose without prior written
permission. Altering, removing, or reproducing any of the trademark
or copyright notices on this package is not permitted.
Customer Support
For customer support, please call 1-800-374-2744.
TRANSFORMING ROBOT
6+
i Carefully remove items from package.
OPERATING INSTRUCTIONS
ii Lift back upwards to access battery compartment. Rotate lever (A) to unlock the battery door (B). Open the battery door, insert 3 “AA” size batteries in the correct polarity shown (C). Close and rotate lever to close the battery door.
Unscrew with a Phillips screw driver to access the battery compartment on the back of the controller. Insert 1 “9V” battery following the correct polarity. Replace the battery compartment door and use a Philips screw driver to screw closed.
B
C
iii Switch both car and remote buttons to “ON” position. For best result use the car on hard surfaces such as wood or tile.
On/Off Switch
A
Battery Cover
Reverse / Automatic spin
Press and Hold
· NOTE: All turning is performed by back wheels.
Forward
Press and Hold
Transform to Robot
Transform to Race Car
Do Not Operate Between Modes
CAUTION: Do not place hands on or near back of car during transforming to avoid potential pinching.
SAFETY PRECAUTIONS
· Do not operate during thunderstorms or rain. · Avoid water, sand and snow when operating car. · Do not submerge car or controller in water. · Never operate your car on the street or highway. · Never operate your car in a confined or crowded area, and do
not use people or animals as obstacles. · Do not run your car into furniture, objects or hard surface, as
this will cause damage to both the objects and your car. · Keep fingers, hair and loose clothing away from the tires. gears
and motor while the car is switched to “ON”. · Do not leave car or remote control near source of heat or under
direct sunlight for long periods of time. · Do not leave car or remote control outside overnight. Dampness
is harmful to interior components · Remove all batteries when not in use to avoid accidental
operation · Adult supervision is recommended when operating this car.
BATTERY WARNING:
· Do not mix old and new batteries. · Do not mix alkaline, standard (carbon-zinc), or
rechargeable batteries. · Insert batteries using the correct polarity.
Do not short-circuit the supply terminal. · Remove batteries when not in use. Recycle or dispose of
exhausted batteries according to federal, state, and local laws. Do not dispose of batteries in a fire – they may leak or explode. · Only use manufacture specified battery(ies), charger(s) and/or adapter, if applicable, specified by the manufacturer. · Always use, replace, and recharge (if applicable) batteries under adult supervision. · Keep these instructions for future reference.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
KEEP THIS INSTRUCTION MANUAL AS IT CONTAINS IMPORTANT INFORMATION FOR FUTURE REFERENCE. Due to continuous product improvements, the pictures on this manual may differ slightly from the actual product.
The artwork and design of this manual are protected by US copyright law and may not be reproduced, distributed, displaced, published or used for any purpose without prior written permission. Altering, removing or reproducing any of the trademark or copyright notices on this package is not permitted.
© 2019 MerchSource, LLC. Irvine, CA 92618. All rights reserved. Distributed by MerchSource, LLC, Irvine, CA 92618.
FOR CUSTOMER SUPPORT, PLEASE CALL
1-800-374-2744
