SOUNDPEATS Wireless Headphones Life Classic Bluetooth 5.2 User Manual
Pairing
- Open the charging case cover, and the left and right earphones will automatically turn on and enter the mutual pairing state. When the white light in the right earphone flashes slowly and the white light in the left earphone is always on, the two earphones are successfully paired. They are in pairing mode.
- Turn on your device’s Bluetooth and select SOUNDPEATS Life classic from the Bluetooth list to complete the pairing.
Reset
- Place the earphones back into the charging case, and make sure they are correctly placed.
- With the case lid open, press and hold the button on the bottom of the charging case for 10S until the bottom red light and white light flash twice alternately. The earphones are activated successfully.
Wearing Methods
- Identify the left earphone and the right earphone.
- Adjust the earphones to fit your ears.
Product Diagram
Control
Q&A
What does the indicator light of the charging case display?
1. The battery life of the charging case:
2. Charging status of the charging case:
How to charge the charging case?
1. Connect the charging case to a Type-C charger. (The current does not exceed 1A).
2.If the earphones stay idle for an extended period, charge them at least every three months to prevent the battery from being damaged.
Why are the earphones still connected to the phone when they are put back to the charging case and the case lid is closed?
1. Check whether the charging case has battery power. If it has run out of battery, closing it will not disconnect the earphones from the device.
2. Make sure the earphones are properly placed in the charging case and the charging metal sheet and PIN are both clean. And wiping clean the contact points on the earphones and the charging case should fix this issue.
