SKEETER HAWK SKE-ACC-0002 Bait Station Replacement Powered Bait Tube
Hello, and thank you for purchasing the Backyard Mosquito Bait Station Replacement Tubes. If your original Bait Station Tube is empty (water and repellent mixture have reached the refill line), remove the tube from the UV light module and discard of properly. Save the UV light module for use with the Replacement Tubes, as directed below.
BAIT STATION SET UP
- Remove cap and plastic seal and fill to the Max Fill Line with water. Reattach the Refill Cap.
- Shake the tube until mixture is fully dissolved then remove the Refill Cap.
- Attach the tube to the UV light module and continue to use as directed.
As the Bait Station is used, some evaporation will occur. Refill with water to the max fill line, as needed. If crusting on top of the water occurs, the effectiveness has not diminished. This is a normal reaction to the yeast in the mixture. If desired, you can place the included plastic cap back on the tube and shake the mixture.
QUALITY GUARANTEE
This product is guaranteed against all defects in workmanship and materials for the original owner for one year from the date of purchase. Damage to or failure of the product or any component thereof due to alteration, misuse, battery leakage or lack of maintenance will void any and all guarantees.
DATE OF PURCHASE:______________ PRODUCT SKU: SKE-ACC-0002
Contact 800.255.6061 for product questions, assistance or warranty claims.
Register your warranty at:
www.SKEETER-HAWK.com
