MH-LBD5-ESP-T-GG Twin Loft Bed With Desk
Product Information
Product Name: Twin Loft Bed With Desk
Model Number: MH-LBD5-ESP-T-GG / MH-LBD5-WH-T-GG
Manufacturer: Belnick Inc.
Assembly Instructions
Before You Begin: Please identify all component
parts and hardware pieces required before you begin. Carefully
remove all of the components from the packaging and set aside for
assembly. Assemble on a soft surface to prevent scratching during
assembly.
Caution: Tighten all components securely before
use. Failure to do so may result in personal injury. DO NOT use any
sharp objects to open plastic wrapped components as damage to
product or components may result.
Warning:
CHOKING HAZARD – Small Parts. Adult Assembly
Required. DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE. Serious or
fatal injuries can occur from furniture tipping over. You must
install Tipping Restraint Hardware (where included) to help prevent
the unit from tipping and causing accidental injury, instability,
death or damage. The tipping restraint is intended only as a safety
measure, it is not a substitute for proper adult supervision. To
help prevent furniture from tipping over it must be permanently
attached to the wall. Anti-Tip Safety Wall Straps suitable for the
unit weight and wall materials (if not included) should be
purchased and installed.
WARNING: To help prevent serious or fatal
injuries from entrapment or falls:
- Never allow a child under 6 years of age on upper bunk.
- Use only mattresses which are 74 – 75 long and 37.5 – 38.5 wide
on the upper bunk. - Ensure thickness of the mattress does not exceed 9 and that the
mattress is at least 5 below the upper edge of guardrails. - Use guardrails on both sides of the upper bunk.
- Prohibit horseplay on or under the bunk/loft bed.
- Do not allow more than one person on the upper bunk.
- Use the ladder for entering and leaving the upper bunk.
STRANGULATION HAZARD: Never attach or hang
items to any part of the bunk bed that are not designed for use
with the bed including, but not limited to, hooks, belts and jump
ropes.
Customer Service: Email:
[email protected] | Phone: 866-552-2810
Assembly Instructions Continued
Attach the Front & Back Braces (Part D) to the Front and
Back Guardrail and Siderail using (6) 1/4 x 30 Hex-Head Screw (Part
7). Insert (2) Wood Dowels (Part 3) and (2) Female Bolt Inserts
(Part 6) into the left side of the Front Guardrails and insert into
Left Brace (Part E). Attach Left Brace (Part E} to the Front
Siderail using (2) 1/4 x 35mm Hex-Head Bolts (Part 4) and (2) Round
Base Weld Nuts (Part 8). Secure Left Brace (Part E) to the
Guardrails using (2) 1/4 x 80mm Hex-Head Bolts (Part 5). Tighten
using Allen Wrench (Part 14).
Note: These assembly instructions are only a summary. Please
follow the full assembly instructions provided in the user
manual.
Thankyouforyourpurchase!
Twin Loft Bed With Desk
ASSEMBLY INSTRUCTIONS
Before You Begin: Please identify all component parts and hardware pieces required before you begin. Carefully remove all ofthe components from the packaging and set aside for assembly. Assemble on a soft surface to prevent scratching during assembly.
Caution: Tighten all components securely before use. Failure to do so may result in personal injury. DO NOT use any sharp objects to open plastic wrapped components as damage to product or components may result.
Warning:
CHOKING HAZARD – Small Parts. Adult Assembly Required.
DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE
Serious or fatal injuries can occur from furniture tipping over. You must install Tipping Restraint Hardware (where included) to help prevent the unit from tipping and causing accidental injury, instability, death or damage. The tipping restraint is intended only as a safety measure, it is not a substitute for proper adult supervision.
To help prevent furniture from tipping over it must be permanently attached to the wall. Anti-Tip Safety Wall Straps suitable for the unit weight and wall materials (ifnot included) should be purchased and installed.
Customer Service Email: [email protected] | Phone: 866-552-2810
MH-LBD5-ESP-T-GG / MH-LBD5-WH-T-GG
01/16
WARNING:
To help prevent serious or fatal injuries from entrapment or falls:
– Never allow a child under 6 years of age on upper bunk. – Use only mattresses which are 74″ – 75″ long and 37.5″ – 38.5″ wide on the upper bunk. – Ensure thickness of the mattress does not exceed 9″ and that the mattress is at least 5″ below the upper edge of guardrails. – Use guardrails on both sides of the upper bunk. – Prohibit horseplay on or under the bunk/loft bed. – Do not allow more than one person on the upper bunk. – Use the ladder for entering and leaving the upper bunk.
STRANGULATION HAZARD: Never attach or hang items to any part of the bunk bed that are not designed for use with the bed including, but not limited to, hooks, belts and jump ropes.
Attach the Front & Back Braces (Part D) to the Front and Back Guardrail and Siderail using (6) 1/4″ x 30 Hex-Head Screw (Part 7)
Insert (2) Wood Dowels (Part 3) and (2) Female Bolt Inserts (Part 6) into the left side of the Front Guardrails and insert into Left Brace (Part E). Attach Left Brace (Part E} to the Front Siderail using (2) 1/4″ x 35mm Hex-Head Bolts (Part 4) and (2) Round Base Weld Nuts (Part 8). Secure Left Brace (Part E) to the Guardrails using (2) 1/4″ x 80mm Hex-Head Bolts (Part 5). Tighten using Allen Wrench (Part 14).
Front & Back
4
‘e
(2pcs)
8
2(pcs)
(2pcs)
7
©
(6pcs)
3
(fJlllll
2(pcs)
6
2(pcs)
Screw
10/16
