Shark Nv392 Series Navigator Lift-away Pro Upright Vacuum User Manual

Shark NV392 Series Navigator Lift-Away Pro Upright Vacuum User Manual

NV392 SERIES
QUICK START GUIDE

[ Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.]

WHAT’S INSIDE

A. Motorized Floor Nozzle
B. Wand
C. Handle
D. Crevice Tool
E. Upholstery Tool

ASSEMBLY

MAINTENANCE

Empty dust cup after each use

Cleaning Filters

TIP:
To keep suction strong, rinse pre-motor filters with water only every 3 months, and the HEPA filter once a year.
Allow filters to air-dry completely for at least 24 hours before reinstalling.
between washes.

Pre-Motor (foam and felt):
With the dust cup removed, take out the foam and felt filters and rinse them with water. Between washes, tap loose dirt off filters when needed.
Post-Motor (HEPA):
To access the HEPA filter, pull the tab under the filter cover, and lift off the cover. Remove and rinse the HEPA filter.

Easy brushroll maintenance

Use a coin to open the 2 locks on the bottom of the floor nozzle.

Remove any string, carpet fibers, or hair that may be wrapped around the brushroll.

USING YOUR VACUUM IN LIFT-AWAY® MODE

For questions or to register your product visit us online at sharkclean.com

©2019 SharkNinja Operating LLC. LIFT-AWAY and SHARK are registered trademarks of SharkNinja Operating LLC. NAVIGATOR is a trademark of SharkNinja Operating LLC.

NV392_QSG_REV_Mv6

DOWNLOAD

Shark NV392 Series Navigator Lift-Away Pro Upright Vacuum:

Quick Start Guide – [Download PDF]

Owner’s Guide – [Download PDF]