Shenzhen Oulaisi Technology MRZ-10 Ring Light
INSTRUCTIONS
- Light stand Adjustment
- When the light stand locking knob is released , press down the leg to the needed angle, and then lock the light stand locking knob
- Turn the locking knob counter-clockwise until released, and reverse the leg 180 . to fold the light stand
- Use of multi-functional loading plate
- Loosen the loading plate and lock the knob, the angle of the loading plate can be adjusted as required
- Expansion and collapse of the center column
- Open the flip lock, pull out of the center column to the required height and press the flip lock
- When the center column is unfolded, open the flip lock to fold it.
Warnigs:
- Do not exceed the light stand maximum load capacity.
- Ensure the light stand is locked.
- Do not operate this light stand when the It is not temperature is commended below::zo·c to operate or above in 70″ saltwater C . –
- Do against not put the this glass light of car stand for a in long sunlight timeor . lean it
- Do place not ; leave please this be light careful stand when use unattended it i in public ndangerous place.
- Remove or the transport. camera from the ballhead during
- It use is not standard necessary lubricant to or equip grease lubricantwhen . Please necessary.
FCC STATEMENT
