Anslut 018813 Rechargeable Work Lamp Instruction Manual

Anslut 018813 Rechargeable Work Lamp Instruction Manual

anslut Logo018813 Rechargeable Work Lamp
Instruction Manual
anslut 018813 Rechargeable Work Lamp

018813 Rechargeable Work Lamp

Danger iconItem no. 018813

Warning-icon.pngImportant! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions)
Important! Read the user instructions carefully before use. Save them for future reference. Jula reserves the right to make changes. For the latest version of operating instructions, see www.jula.com
2022-09-06
© Jula AB
JULA AB, BOX 363, SE-532 24 SKARA

anslut 018813 Rechargeable Work Lamp - Fig 1anslut 018813 Rechargeable Work Lamp - Fig 2anslut 018813 Rechargeable Work Lamp - Fig 3

SAFETY INSTRUCTIONS

Follow all the safety instructions, maintenance instructions, and other instructions, including the technical data.

  • The light source cannot be replaced. If the light source fails, the entire product must be replaced.
  • Do not use the product if the glass cover is cracked or damaged.
  • Only charge the battery with the supplied charger.
  • The product can be used indoors or outdoors.
  • The product can be used on the table or floor.
  • The product is not waterproof when the charger is connected.
  • Recycle used batteries in accordance with local regulations.
  • The battery cannot be replaced.
  • The product has insulation class III, and charger insulation class II.
  • Products with a protection rating of IP54 are splash-proof and protected from solid objects with a diameter of more than 1 mm.
  • Never modify the product in any way.
  • Keep children and pets at a safe distance from electrical products.
  • Light products must not be put on a damp surface.
  • The maximum projected area of the flood light is 0.022m².
  • Check after assembly and installation that no wires have been damaged.
  • The manufacturer cannot accept liability for any damage resulting from failure to follow these instructions.

SYMBOLS

Danger iconRead the instructions.
CE SYMBOLApproved in accordance with the relevant directives.
milwaukee M12 SLED Spot Ligh - IconSafety class III
anslut 018813 Rechargeable Work Lamp - Icon 1Rough service luminaires.
WEE-Disposal-icon.pngRecycle discarded products in accordance with local regulations.

TECHNICAL DATA

Output10 W
Color temperature4000 K
Luminous flux700 lm – 350 lm – off
Protection ratingIP54
Battery techniqueLi-Ion
Battery capacity2×3.7V Li-ion, DC1800mAh(DC3600mAh)
Battery life3 h
Charging time4 h
Voltage240 V ~ 50 Hz
Size170 x 125 x 42 mm
Weight390 g

DESCRIPTION

Battery-powered and rechargeable work lamp. Charges with micro USB cable (included). Lightweight and easy to take with you.

DIMENSIONS
FIG. 1

USE
CHARGING
FIG. 2

OUTPUT SETTINGS

  1. Press once: On / 100%
  2. Press twice: 50%
  3. Press three times: Off
    FIG. 3

MAINTENANCE

The product does not contain any parts that can be repaired by the user. Wipe off any dust from the surface of the product with a soft cloth. Make sure that no liquid or moisture gets into the product or its electrical connections.

anslut Logo

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals