HKZOOI TC-001B Dog Training Collar
Specifications
- DIMENSIONS:13 x 6.14 x 1.73 inches
- WEIGHT:36 Ounces
- DOG WEIGHT: 15 – 100 lbs.
- SAFE TRAINING MODES: 3
- WATERPROOF RATING: IPX7
- CHARGING TIME: 3 hours
- CONNECTIVITY RANGE: 1640 ft.
- NECK SIZE: 8 – 25 inches
- BATTERY LIFE: 90 days
Introduction
The dog is a person’s best buddy since they always make you feel comfortable and content. However, there are situations when your dog’s undesirable behaviors will harm your bond with him. Like how you would find annoying barking, chasing, chewing, and biting. Allow the HKZOOI Dog Training Collar to assist you in training your dog and in correcting undesirable behavior.
The ideal option for all of your dog training needs is the HKZOOI dog training collar.
- 1+2 Channel, 2 Receivers for Simple Training of Two Dogs at Once
- Beep, Vibration, and Shock as the 3 Dog Training Modes
- Up to 1640 ft. of control range – Safer Fixed Silicone Contact Prong
- Long-Lasting Battery Life and Simple Charging – IPX7 Waterproof Receiver
- Belt Adjustable for 15 to 100 pounds
The contact point for the dog shock collar has an updated conductive silicone coating, and the prongs are safe and won’t irritate the dog’s skin. You needn’t worry that the prongs would fall during dog training because they can’t be relocated either. Sometimes shock mode serves as a type of discipline. Please start using this mode at the lowest setting if you wish to.
A USB charging cord is included. The receiver and remote can easily be recharged using a power adapter, battery bank, or laptop. They typically take three hours to fully charge. To prevent accidentally shocking or vibrating the dog, use the vibration and shock mode with ZERO level. There are also anti-accidental shock settings; to activate the shock function, double-click the shock mode after switching from beep or vibration mode.
You may train your dog in the backyard, field, park, beach, etc. thanks to the remote dog training collar’s range of up to 1640 feet (550 yards) in barrier-free areas and 1000 feet (330 yards) in regions with barriers.
What’s included
- 1 x Remote Transmitter
- 2 x Receiver Collar
- 2 x Adjustable Collar Belt
- 1x test Light
- 2 x USB Charging Cable
- 1 x User Operating Guide
How to use HKZOOI DOG Training Collar
Utilizing the shock collar is easy. Put the collar around the neck of your pet. To change the shock mode, use the receiver. There are three shock modes, as well as beep, vibration, and static. You can do this by turning the knob located on the receiver remote’s right upper corner.
How to use the Dog Collar for 2 dogs
Yes, there are 2 receivers and 1 remote with this set of dog training collars. Consequently, you can train two canines at once.
Here is how to connect the remote and collar.
- Make the remote awake. Choose channel 1 next.
- After three seconds of holding down the power button on the receiver, you will hear a “beep” and notice the green LED light flashing.
- To confirm a successful pairing, press the “beep button.” Select channel 2, then link a different receiver by performing the procedure above.
Frequently Asked Questions
This dog shock collar is water-resistant; however before using it in the water, make sure the receiver’s charging port is completely closed.
The shock function is tested using the test light to see if it works. Press the shock button after placing the test light on the receiver contact prong. The shock mode functions properly, and the test light glows orange. The various intensity levels are represented by varying brightness.
Yes. You must alternate between the first and second collars. The good news is that they all have the same charger and last for a solid three weeks (at least that’s how long mine lasted, way longer than my first set diff brand)
No, the transmitter doesn’t have a lanyard or a strap.
No, it doesn’t contain any harmful substances.
This dog training collar only functions when the remote is in use; it does not automatically vibrate, beep, or shock the dog when it barks.
They turn off automatically when not in use.
You must change to channel 1 or channel 2. In other words, you can’t use them simultaneously. For example, to control collar 1, you’d need to go to channel 1, and to control collar 2, you’d need to go to channel 2.
Yes, the collar is capable of fitting 16 lbs. dog.
No, it doesn’t have such a setting.
The actual dimensions of the receiver are 2.8 inches,
Yes, each dog can be warned separately.
Double click the power button and this will turn off the collar receiver.
No, it doesn’t have any such button or lock.
No, the mode of the stimulus will appear on the screen and you can do only one at a time.
