72.75 Inch H Black Solar LED Post Light
Product Information
- This product is a solar light with a maximum light output of
600LM. - The model contains 2x 3.7V Li-Ion batteries of the type
14500. - The light uses 1 or more LED’s as a light source, and contains
white SMD-LED (L15). - The sensor angle is 120 degrees, the sensor distance is 7
meters, and the sensor delay time is 15 seconds.
Product Usage Instructions
- Read the safety and assembly instructions carefully before
using the product. - Do not attempt to convert or make any changes to the solar
lights yourself as this will void the guarantee. Consult the vendor
if in doubt. - Avoid exposing the product to extreme heat, pressure, or other
inappropriate use as this will also void the guarantee. - Do not use the product as a toy, and keep it away from
children. - To assemble the solar lights, remove the insulation plastic
strip and move the switch to ON. - Assemble or place the solar lights without putting any pressure
on the solar-panel or protection-hood. Do not use a hammer. - Place the light carefully in a proper position for good use of
the solar-sensor. Ensure that it is positioned in a location that
receives ample sunlight/daylight so that the battery can fully
charge during the day. - Clean the solar cells regularly with water and mild detergent
for maximum storage of sunlight. - The light will switch on automatically when it turns dark due
to the built-in light sensor. - Do not cover the product with isolation material or any
material of that sort. - Recycle the packaging and dispose of batteries in the correct
way.
Follow the safety and assembly instructions carefully, and keep this manual in a safe place:
1.
Read this manual carefully. If in doubt, consult the vendor.
2.
Based on health and safety rules, you must not convert (CE), or make any changes to the
solar lights yourself. Should you ignore this the guarantee will be null and void.
3.
Do not expose the product to extreme heat, extreme pressure, or other inappropiate use.
Should you ignore this again the guarantee will be null and void.
4.
This product is not a toy, and is not be used as such by children.
Solar installation instructions:
A.
Remove the insulation plastic strip and move the switch to ON.
C.
Assemble or place the solar lights without putting any pressure on the solar-panel or
protection-hood. Do not use a hammer!
D.
Because of the built-in light sensor, the light will switch on automatically when it turns dark.
Place the light carefully in a proper position, for good use of the solar-sensor.
sunlight/daylight. Position the lamp with care, so that the battery can fully charge during the day.
F.
Regularly clean the solar cells with water and mild detergent for a maximum storage of sunlight.
.
.
2×3.7
See the pictorial signs on the enclosed users guide. Below is an explanation of the pictorial signs.
Li-Ion
AA-800MAH
P9
P11
C7
C1
C9
12x
F
SMD LED WHITE
L15
M2
M18
M19
LED
L13
P9
This model contains 2x 3,7V Li-Ion battery of the type 14500. This light has a
max. 600LM light output
P11 Under normal circumstances the light will burn for 6 hours after turning on power
C7
Solar lighting is designed solely for outdoor use
C1
Safe around children and animals
C9
No connection to the electrical circuit required
L13 This light uses 1 or more LED’s as a light source. This combines a long life-time with low
power consumption. Solar LED’s are not interchangeable.
L15 This model contains white SMD-LED.
M2
surfaces. Built in products must under no circumstances be covered by isolation material,
or any material of that sort.
M18 Please recycle packaging
M19 Please dispose of batteries in the correct way
ASSEMBLY INSTRUCTIONS
OFF
ON
1
2
Sensor angle 120 Degree Sensor distance : 7 M Sensor delay time : 15 S Light output : 600Lumen
3 4
