HOW TO PROPERLY SET UP YOUR GARDEN HOSE
- STEP1: To ensure maximum flexibility, initial hose setup should be performed in any spacious area, set to 10· or above.
- STEP 2: Remove all packaging and ties from the hose.
- STEP 3: Unwind the hose loosely in a circular motion before attaching it to your faucet or spigot.
- Note: Do NOT pull the hose to uncoil it as this may cause unnecessary kinking.
- STEP 4: Attach the female end of the hose to the faucet. Allow water to run through it continuously for 2-3 minutes. Ensure that the washer is positioned correctly in the coupling.
GARDEN HOSE TIP
- Depending on your type of hose reel, the Guard-N-Grip connector can be removed off of the coupling and pulled down the length of the hose.
- This will guarantee an easy wind and smooth water flow once the hose is wound onto the reel.
