Deswan Bsc020-t Aluminum Outdoor Side Table Instruction Manual

BSC020-T Aluminum Outdoor Side Table

Product Information

• Product: Table
• Parts: Table Top, Leg (4), Connecting Part, M8
  Headless Screw (9), Flat Washer M8 (9), Spring Washer M8 (9), Nut
  M8 (9), Adjustable Foot Pad (5), Plastic Cap M8 (9), Wrench, and
  Screwdriver
• Caution: Read instructions carefully before
  assembling. Count and organize all parts before beginning. Assemble
  on a clean soft surface to prevent scratching of the parts surface
  paint. One spare screw provided for each screw.

Product Usage Instructions

1. Before beginning assembly, read the instructions carefully and
   count and organize all parts.
2. Assemble the product on a clean soft surface, such as a piece
   of carpet, to prevent scratching of the parts surface paint.
3. Attach the legs to the table top using headless screws, flat
   washers, spring washers, and nuts. Do not tighten completely at
   this stage.
4. Attach the connecting part to the table legs using headless
   screws, flat washers, spring washers, and nuts.
5. Tighten all the screws and nuts after proper adjustment. Put
   plastic caps on all nuts.
6. Turn over the table and adjust the feet pads under legs if the
   table is unbalanced.
7. Do not over tighten as aluminum is a soft metal and over
   tightening may strip thread or break parts.

ASSEMBLY INSTRUCTION
CAUTION:
1. Please read this instruction carefully before assembling. Count and organize all parts before you begin.
2. Assemble the product on a clean soft surface, such as a piece of carpet, so as to prevent the surface paint of parts from scratching off.
3. One more spare for each screw.
PARTS&HARDWARE LIST

NO.

DESCRIPTION

QTY

A

Table Top

1

B

Leg

4

C

Connecting Part

1

D M8 Headless Screw

9

E

Flat Washer M8

9

F

Spring Washer M8

9

G

Nut M8

9

H Adjustable Foot Pad

5

I

Plastic Cap M8

9

J

Wrench

1

K

Screwdriver

1

Assembly:
1. Upend the table top on a smooth surface.
2. Attach the legs to the table top using headless screws , flat washers, spring washers and nuts. Do not
tighten completely at this stage. 3. Attach the connecting part to the table legs using headless screws, flat washers, spring washers and
nuts. 4. Tighten all the screws and nuts after proper adjustment. Put plastic caps on all nuts. 5. Turn over the table, adjust the feet pads under legs if the table is unbalanced.

PLEASE DO NOT OVER TIGHTEN (Aluminum is a soft metal, over tightening may strip thread or break parts)