MCR1030 Soho Tufted Velvet Swivel Desk Chair
Product Information:
- Product Name: Chair
- Product Dimensions: 25.20W x 27.17D x
33.86H - Weight Capacity: 275 lbs
Product Usage Instructions:
- Before beginning assembly of the product, ensure that all parts
and hardware are present. Compare the parts with the part contents
list and hardware contents list. - If any part is missing or damaged, do not attempt to assemble
the product. - Estimated Assembly Time: 10 minutes
- Tools Required for Assembly (included): Allen Key
- If you encounter any difficulties during assembly, our friendly
Customer Care team is available to assist you. - Step 1: Take out the legs and hardware from the small box.
- Step 2: Put the washers on the bolt in the order shown in the
picture. - Step 3: Insert the base plate with the bolts and tighten
completely. - Step 4: Insert the gas lever to the base plate, ensuring they
are in the correct position. - Step 5: Insert the legs to the bar lever, ensuring they are in
the correct position. - Step 6: Put the chair upright and make sure the legs are level.
This item may require periodic tightening.
Care and Maintenance:
- Spot clean using a mild water-free solvent.
- Only a professional cleaner should undertake a complete overall
cleaning. - The use of steam or water-based cleaners may cause excessive
shrinking or staining.
Warnings:
- Do not stand on the chair.
- Do not over torque bolts/screws.
NOTICE
*Please make sure that you have all parts indicated and they are in good condition before you begin assembly of this item. Refer to part list and hardware list below for guidance. *This item should be assembled on a soft surface to prevent scratching the finish during assembly. * This item may require periodic tightening. *If you are having difficulty , our friendly Customer Care team is always here to help.
PREPARATION
*Before beginning assembly of product , make sure all parts are present .Compare parts with part contents list and hardware contents list. *If any part is missing or damaged ,do not attempt to assemble the product. *Estimated Assembly Time:10 minutes. * Tolls Required for Assembly ( included) : Allen Key
CARE AND MAINTENCE
*Spot clean using a mild water-free solvent. * Only a professional cleaner should undertake a complete overall cleaning. *The use of steam or water-based cleaners may cause excessive shrinking or staining.
Part List and Hardware List
PIECE A
DESCRIPTION Seat Body
PICTURE
QUANTITY 1X
Product Dimensions:25.20″W x 27.17″D x 33.86″H
B
Legs
FRONT
C
Rear Legs
D
Gas lever
HW1 Allen bolt :M8 x 1.25 x 30 mm
HW2
Spring Washer :M8
HW3 HW4
Flat Washer :M8x22mm Allen Key
1X 1X
1X
WARNING
4X
4X
Weight Capacity: 275 lbs
WARNING: DO NOT STAND ON CHAIR
4X
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
1X
PREPARATION
*Before beginning assembly of product , make sure all parts are present .Compare parts with part contents list and hardware contents list. *If any part is missing or damaged ,do not attempt to assemble the product. *Estimated Assembly Time:10 minutes. * Tolls Required for Assembly ( included) : Allen Key *If you are having difficulty , our friendly Customer Care team is always here to help.
HW1 HW2 HW3
HW1 HW4
HW2 HW3
STEP 1: TAKE OUT LEGS AND HARDWARE FROM THE SMALL BOX.
STEP 2: PUT THE WASHERS ON THE BOLT IN THE ORDER SHOWN IN THE PICTURE.
STEP 3: INSERT THE BASE PLATE WITH THE BOLTS . TIGHTEN COMPLETELY.
STEP 4: INSERT THE GAS LEVER TO BASE PLATE. MAKE SURE THEY ARE IN CORRECT POSITION.
STEP 5: INSERT THE LEGS TO BAR LEVER. MAKE SURE THEY ARE IN CORRECT POSITION.
STEP 6: PUT THE CHAIR UPRIGHT AND MAKE SURE LEGS ARE LEVEL, THIS ITEM MAY REQUIRE PERIODIC TIGHTENING.
