SG3001 Burner Gas Grill
Product Information:
The product is a grill with a cart and side burner shelf. It
includes various parts such as warming rack, thermal baffle, legs,
leg connectors, screws, tank holder, cooking grates, grease cup,
and other accessories.
Product Usage Instructions:
- Assemble the leg connector upper (9) and leg connector lower
(13) to left front leg (LF)(12) and left back leg (LB)(8) with 8
bolts (A). Assemble the leg connector upper (9) and leg connector
lower (13) to right front leg (RF)(18) and right back leg (RB)(19)
with 8 bolts (A). - Assemble the leg connector back (21) to left and right side
legs with 4 bolts (A). - Assemble the cart board upper (22) and cart board lower (20) to
left and right side legs with 8 bolts (A). - Assemble the thermal baffle (7) to leg connector upper (9) with
4 bolts (A). Install the feet (17) to the right legs. - Place the main body (5) onto the cart, fasten it with 8 bolts
(A). - Insert the extension wire (31) to the leg connector upper (9)
as shown. Screw 4 bolts (A) halfway on the main body. - Assemble the side table (6) to the main body by hanging it to
the half-screwed bolts, fasten it with 4 bolts (A). Then secure the
half-screwed bolts. - Assemble the side burner shelf (27) to the main body by hanging
it to the half-screwed bolts, fasten it with 4 bolts (A). Then
secure the half-screwed bolts. - Make the valve insert through the hole of side burner shelf
decoration. Install the knob base (26) to the side burner shelf
decoration with 2 bolts (B). - Assemble the electrode (30) to the side burner shelf with 1
bolt (B). - Place the cooking grates (3) onto the main body.
- Hang the grease cup brace (24) underneath the main body, place
the grease cup (23) onto the brace. Assemble the tank holder (11)
to leg connector upper with screw (10).
4
1.
W-CQ020017
2. Warming rack
ZH-GS030002
3.
W-GS02A005
4.
Z-GS030027
5.
6.
Z-GS030022
7. Thermal baffle
Z-GS030011
8. Left back leg(LB)
Z-GS030006 Leg connector
9. upper
Z-GS030003
10. Screw
W-GD401006
11. Tank holder
Z-GS030014
12. Left front leg(LF)
Z-GS030005 Leg connector
13. lower
Z-GS030001
14. W-20130010
W-20130006
15.
W-GS030004
16. Washer
W-10030004
1
17. Foot
2
W-GS030005
1
18. Right front leg(RF)
Z-GS030007
1
2
19. Right back leg(RB)
1
Z-GS030008
3
20. Cart board lower
1
Z-GS030029
1
Leg connector
21. back
1
Z-GS030002
1
22. Cart board upper
1
Z-GS030028
1
23.
1
YB001
1
24.
1
YJ001
2
25.
1
W-CQ020020
1
26. Knob base
1
W-11030001
1
27.
Side burner shelf
H-GS030002+Z-20130035
1
W-20130022
1
28. Side burner grate
1
W-20130033
2
29. Side burner
1
W-GS030016
2
30. Electrode
1
W-GC33E012
1
31.
1
W-GD430013
2
A M5X10 52pcs B M4X8 5pcs C Split pin 2pcs
5
Assemble the leg connector upper (9) andleg
connector lower (13) to left front leg (LF)(12) and left back leg (LB)(8) with 8 bolts (A).
Assemble the leg connector upper (9) and leg connector lower (13) to right front leg (RF)(18) and right back leg (RB)(19) with 8 bolts (A).
8
Assemble the leg connector back (21) to left and right side legs with 4 bolts (A).
Assemble the cart board upper (22) and cart board lower (20) to left and right side legs with 8 bolts (A).
15 16
left legs (12, 8),
14 split pins C
Assemble the thermal baffle (7) to leg connector upper (9) with 4 bolts (A). Install the feet (17) to the right legs.
Place the main body (5) onto the cart, fasten it with 8 bolts (A).
Insert the extension wire (31) to the leg connector upper (9) as shown.
Screw 4 bolts (A) half way on the main body.
Assemble the side table (6) to the mainbody by hanging it to the half screwed bolts, fasten it with 4 bolts (A). Then secure the half screwed bolts.
26
Assemble the side burner shelf (27) to the mainbody by hanging it to the half screwed bolts, fasten it with 4 bolts (A). Then secure the half screwed bolts.
Make the valve insert through the hole of side burner shelf decoration Install the knob base (26) to the side burner shelf decoration with 2 bolts (B).
29 30
29 B
Assemble the electrode (30) to side burner shelf with 1 bolt (B).
13
14
4
25
(28)
15
Place the cooking grates (3) onto the main body.
(2)
main body
16
1 Hang the grease cup brace (24) underneath the main body, place the grease cup (23) onto the brace. Assemble the tank holder (11) to leg connector upper with screw (10).
10
