Model : PDT-MAC-BL / PDT-MAC-CR
Pendant LED light fixture – Maelstrom™
INSTRUCTION MANUAL
IMPORTANT: READ CAREFULLY AND KEEP.
Made in China
Residential use only indoor use only
INCLUDED HARDWARE
ITEM | DESCRIPTION | QUANTITY |
 | Mounting bracket | x 1 |
 | Retaining screw | x 2 |
 | Wire connector | x 3 |
 | Canopy screw | x 2 |
 | Light LED pendant fixture with canopy assembled | x 1 |
STEP-BY-STEP INSTALLATION
WHAT YOU WILL NEED
Screwdriver
2
CAUTION
WARNING:
Risk of electrical shock. Turn off the breaker at the panel.
Switch off the main electrical supply from the fuse box/circuit breaker before installing the unit or doing any maintenance.
Do not use outdoor.
CAUTION
If using a dimmer, it must be LED compatible.
IMPORTANT
The installer and/or user must read, understand and follow these instructions before installing the product. This product must be properly installed before it is used. If instructions are not followed, the manufacturer will not be held responsible for any problems or product malfunction. Failure to follow installation and/or operating instructions voids the warranty.
We recommend that this product be installed by a certified electrician. In some states or provinces, it is a legal requirement for this type of product to be installed by a certified electrician, according to the electrical and building codes effective in the region where the unit is used.
HEIGHT ADJUSTMENT
MOUNTING BRACKET INSTALLATION
LIGHT COLORS ADJUSTMENT
CONNECTING THE WIRES AND FINAL INSTALLATION
CANADA (IC)
Operation is subject to the following two conditions:
- this device does not cause interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
