Brainlit Balder Lighting For Health And Wellbeing Instruction Manual

Balder Lighting for Health and Wellbeing

Product Information

The product is a luminaire with a Balder design. It consists of
a driver, WAGO connectors, screws, a diffusor, and a light
source(s). The luminaire is powered by a power connection.

Product Usage Instructions

1. STEP 1: To disassemble the luminaire, unplug
   the power connection by pulling apart the WAGO connectors.
2. STEP 2: Take down the luminaire by opening the
   ceiling cup and unscrewing the screws that secure the cup to the
   ceiling.
3. STEP 3: Unscrew the screw(s) on the driver
   touch protection using a screwdriver with a PH2 head. Press down
   the cable securing button on the driver to unplug the cables.
4. STEP 4: Unscrew all the screws on the top of
   the luminaire using a suitable bit and screwdriver.
5. STEP 5: Remove the diffusor from the
   luminaire. Note: Do not use any sharp objects.
6. STEP 6: Unplug the light source(s) by pressing
   in the center and pulling them out.
7. STEP 7: Unscrew the screws holding the light
   source(s) using a suitable bit and screwdriver.
8. STEP 8: Recycle all parts accordingly.

If you are replacing the light source, attach the new light
source and remount the luminaire by following these instructions in
reverse order.

Disassembly instructions

Balder

STEP 1

pull

pull

DA +

DA +

Unplug the power connection to the luminaire by pulling

D-A

D-A

L

L

apart the WAGO connectors.

N

N

STEP 2 Take down the luminaire by opening the ceiling cup and unsrewing the screws securing the cup to the ceiling.

STEP 3 Unscrew the screw(s) on the driver touch protection using a screwdriver with a PH2 head.

unscrew

press down and…

Unplug the cables by pressing down the cable securing button on the driver.
STEP 4 Unscrew all the screws on the top of the luminaire with a suitable bit and screwdriver.
STEP 5 Remove the diffusor from the luminaire. N.B. Don’t use any sharp objects.

…pull unscrew

STEP 6 Unplug the light source(s).

press in centre and pull out

STEP 7 Unscrew the screws holding the light source(s) with a suitable bit and screwdriver.
STEP 8 Recycle all parts accordingly.
If replacing the light source; attach new light source and remount the luminaire by following this instruction in reverse.