Gopro Super Suit Dive Housing User Guide

Super Suit Dive Housing

Product Information:

The Dive Housing is an ultra durable and waterproof housing
designed for deep sea diving and extreme activities. It is capable
of being submerged up to 197′ (60m) underwater. The housing lens
cover protects the lens from scratches, dirt, and debris. It comes
with both a standard backdoor and a standard BacPac backdoor, which
are waterproof for use with or without a BacPac accessory.
Additionally, it includes a skeleton backdoor and a skeleton BacPac
backdoor, which enable optimal audio capture during low-speed
activities and provide access to an attached LCD Touch BacPac (sold
separately). Please note that the skeleton backdoors are not
waterproof.

What’s Included:

1. Dive Housing
2. Housing Lens Cover
3. Standard Backdoor + Standard BacPac Backdoor
4. Skeleton Backdoor + Skeleton BacPac Backdoor

Product Usage Instructions:

Opening the Dive Housing:

1. Grip the housing with your left hand.
2. Using your right hand, place your thumb to the left side of the
   arrow and index finger just below the latch.
3. Pinch your fingers together, sliding the arrow to the
   right.
4. Use your fingertips to pull the latch upright and unlock it
   from the housing.

Closing the Dive Housing:

1. Place your GoPro inside the housing.
2. Close the housing backdoor.
3. Hook the latch into the groove on the backdoor.
4. Press down on the latch until it locks into place.

Important Safety + Handling Information:

WARNING: Failure to properly care for your Dive
Housing can result in leaks that may damage or destroy your camera.
Your warranty does not cover water damage resulting from user
error.

CLEANING THE LENS: Clean the housing lens
immediately after it comes into contact with anything that may
cause a stain, including ink, makeup, dirt, food, or lotion. To
clean the lens, gently wipe it with a soft, damp cloth. Do not use
window cleaners, household cleaners, solvents, alcohol, ammonia, or
anything abrasive to clean the lens.

PREVENTING WATER DAMAGE TO YOUR CAMERA: It’s
very important to keep the housing’s rubber seal clean. A single
hair or grain of sand can cause the housing to leak and damage your
camera. To clean the seal, remove it from the housing, rinse it in
fresh water, and shake dry (drying with a cloth may cause lint to
compromise the seal). After using the housing in salt water, always
remember to rinse it with fresh water to prevent corrosion.

Learn more about GoPro products at gopro.com

Please Recycle

130-06139-000 REVB

USER GUIDE
Dive Housing
ULTRA DURABLE AND WATERPROOF TO 197′(60M).

/ What’s Included

DIVE HOUSING Designed for deep sea diving and extreme activities.
HOUSING LENS COVER Protects the housing lens from 2 scratches, dirt and debris.

STANDARD BACKDOOR + STANDARD BACPAC BACKDOOR Waterproof backdoors for use with or without a BacPacTM accessory.
SKELETON BACKDOOR + SKELETON BACPAC BACKDOOR Enable optimal audio capture during low-speed activities, and access to an attached LCD Touch BacPac (sold separately). NOT waterproof.

/ Opening the Dive Housing

Step 1 Grip the housing with your left hand.

Step 2 Using your right hand, place your thumb to the left side of the arrow and index finger just below the latch.

Step 3 Pinch your fingers together, sliding the arrow to the right.

Step 4 Use your fingertips to pull the latch upright and unlock it from the housing.

3

/ Closing the Dive Housing

Step 1

Step 2

Place your GoPro Close the

inside the housing. housing backdoor.

Step 3 Hook the latch into the groove on the backdoor.

Step 4 Press down on the latch until it locks into place.

4

/ Important Safety + Handling Information
WARNING: Failure to properly care for your Dive Housing can result in leaks that may damage or destroy your camera. Your warranty does not cover water damage resulting from user error.
CLEANING THE LENS Clean the housing lens immediately after it comes into contact with anything that may cause a stain, including ink, makeup, dirt, food or lotion. To clean the lens, gently wipe it with a soft, damp cloth. Do not use window cleaners, household cleaners, solvents, alcohol, ammonia or anything abrasive to clean the lens.
PREVENTING WATER DAMAGE TO YOUR CAMERA It’s very important to keep the housing’s rubber seal clean. A single hair or grain of sand can cause the housing to leak and damage your camera. To clean the seal, remove it from the housing, rinse it in fresh water and shake dry (drying with a cloth may cause lint to compromise the seal). After using the housing in salt water, always remember to rinse it with fresh water to prevent corrosion.
5

Learn more about GoPro products at gopro.com

Please Recycle

130-06139-000 REVB

References

• GoPro | World’s Most Versatile Cameras | Shop Now & Save