EX240N LCD Monitor
Product Information
The LCD Monitor Model No. EX240N contains hazardous substances
such as Pb and BFRs. These substances are exempted under the RoHS
directive, but the majority of them are present in the printed
circuit boards assembly. Therefore, complete disposal of the old
appliance is required to reduce emissions as much as possible. This
treatment can only be performed in authorized handling plants.
Product Usage Instructions
- Gather the necessary disassembly tools: Philips screwdriver for
M3 screw, nosed pliers, diagonal cutting pliers, slotted
screwdriver, six-point sockets, Philips screwdriver for M2.5 screw,
and a knife. - Ensure that you are in an authorized handling plant to perform
the disassembly process. - Disassemble the LCD Monitor using the gathered tools according
to the disassembly process provided in the user manual. - The total time for disassembly is 30 minutes.
- Dispose of the disassembled materials and components properly
in accordance with the requirements of ANNEX VII of DIRECTIVE
2012/19/EU on waste electrical and electronic equipment
(WEEE).
Recycle Disassemble Instruction (Dismantled Information)
Requirements according to ANNEX VII of DIRECTIVE 2012/19/EU on waste electrical and electronic equipment (WEEE)
Materials and components with hazardous content LCDs may contain hazardous substances like Pb and BFRs which are covered by exemptions under the RoHS directive. However, the majority is present in the printed circuit boards assembly. In order to reduce emissions as much as possible, a complete disposal of the old appliance is required. This treatment may only be performed in authorized handling plants.
Product Name: LCD Monitor Model No.: EX240N
Disassembly Tools
Tool Philips Screwdriver for M3 Screw Nosed Pliers Diagonal Cutting Pliers Slotted screwdriver Six Point Sockets Philips Screwdriver for M2.5 Screw Knife
picture
Disassembly process
Disassembly Time
Total time: 30 minutes
