iLIVE SR221E-29-10 29 Inch HDSoundbarwithBluetoothWireless Instruction Manual

Home » Blog » iLIVE SR221E-29-10 29 Inch HDSoundbarwithBluetoothWireless Instruction Manual

29“ HDSoundbarwithBluetoothWireless
User’s Guide for Model SR221E-29-10
For the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com

Contents hide

1 Safety Instructions & Warnings

2 Important Safety Instructions

8 Company Information

9 Documents / Resources

10 Related Posts

Safety Instructions & Warnings

WARNING: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user-accessible parts.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer birth defects or other reproductive harm. For more information go to www.F65Warnings.ca.gov.
This product meets and complies with required Federal product guidelines.

WARNING: DO NOT INGEST BATTERY, CHEMICAL BURN HAZARDS.

Important Safety Instructions

Read these Instructions.
Keep these Instructions.
Heed all Warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the art/apparatus combination to avoid injury from tip-over.

FCC Warnings

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Pan 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential install-nation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Additional Warnings and Precautions

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
The mains plug is used as a disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.
WARNING: Shock hazard – Do Not Open.
Caution and marking information is located at the rear or bottom of the apparatus.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing.
Objects filled with liquids, such as vases, shall not be placed on the apparatus.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
WARNING: Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive finish. As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recommend using a protective bather such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining.
WARNING: The use of this unit near fluorescent lighting may cause interference regarding the use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.
CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
The battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
Do not mix old and new batteries.
Completely replace all old batteries with new ones.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-me, etc) batteries.
Batteries should be recycled or disposed of as per state and local guidelines.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.

Setup

Features & Specifications

29″ length
Supports Bluetooth
Wireless range: 60 ft.
2 channel stereo sound
Digital volume control
Full-function remote
Optical digital audio input
Aux In (3.5mm audio input)
RCA stereo audio inputs

Includes

Remote control with I CR2025 battery
Optical digital audio cable
AC/DC power adapter
Wall-mount hardware and instructions

power

Plug the small end of the power cord into the DC Input on the back of the speaker, and the large plug into a standard wall outlet.

Remote Battery
Remote control: requires 1 CR2025 button cell type battery (included)

Orientation

Front View

STATUS	INDICATOR
Power Off	Red Light
Optical Mode	Amber Light
RCA/Aux-In Mode	White Light
Line In Mode	Green Light
Bluetooth Pairing	Flashing Blue Light
Bluetooth Connected	Blue Light

Rear View

Speaker Inputs Detail

Remote

Bluetooth Wireless

Pairing a Bluetooth Device for the First Time

When first powered on the soundbar defaults to Bluetooth mode. A voice will say, “Bluetooth”, and the LED indicator will slowly flash blue. When pairing, remain within 3 feet of the Bluetooth device.
Using the controls on your Bluetooth device, select ITB031 in the Bluetooth Settings to pair. If need be, refer to the user’s manual for your specific device for more information.
When successfully paired, a voice will announce, “Bluetooth is connected”, and the LED indicator will turn solid blue. Audio from the connected Bluetooth device will now be heard through the speaker.
Use the controls on the connected Bluetooth device to select and play audio. Use the speaker controls or the connected Bluetooth device to play, pause, and adjust the volume level.
After the initial pairing, whenever the soundbar is powered on, the soundbar will automatically connect to the last Bluetooth device used. Note: If your device should become unpaired or you find it is unable to connect, press & hold the Play button on the remote or press the Pair button on the soundbar to enter pairing mode. A voice will announce, “Bluetooth is connecting”, and you can connect to the speaker manually.

Playing Audio Wirelessly

After pairing to a Bluetooth device, use the controls on the connected Bluetooth Device to select a track.
Play, pause or skip a selected track using the controls on the connected Bluetooth Device or the sound bar’s remote.
Audio played through the connected Bluetooth device will now be heard through the speakers.

Audio Inputs

Optical Input
You will need An audio source with an Optical Audio Output and a Digital Optical Audio Cable (included).
Please remove the protective plastic cap over the end of the optical cable before attempting to connect it.

Connect the Digital Optical Audio Cable (included) to the optical output on the audio source and to the Optical Input on the speaker bar.
Press the Power button to power the unit on.
Press the Source button repeatedly to switch to SPDIF Mode, indicated by an amber light.
Using the native controls on your connected device, make sure the audio settings are set to PCM or Optical Audio and are turned On.
Audio from the connected audio source will now be played through the speakers.

Important tips for optical audio:
Use the correct Toslink cable and make sure that it is firmly seated in both source and soundbar sockets.
Optical output is activated on the source (they should see a red light emitting from the Toslink socket). It may be labeled SPDIF in the setting menu of the source.
The optical output is set to output PCM and not Dolby Digital.

Stereo RCA Inputs (Aux In)
When connecting two products using an RCA cable (not included), match the colored ports to their corresponding plugs.

Connect the RCA cables (not included) to the RCA Stereo Inputs located on the back of the unit, and to the audio outputs on a television or other audio source.
Press the Power button to power on the unit.
Press the Source button to select Aux-In, indicated by a white light.
Audio played through the television will now be heard through the speakers.

Line In
3.5 mm audio Input cable not included.

Plug one end of a 3.5 mm audio input cable into the Unit In on the unit and plug the other end of the cable into the audio output/headphone output on an MP3 Player or other audio source.
Press the Power button to power the unit on.
Press the Source button to select Line In, indicated by a green light.
Audio played through the connected device will now be heard through the speakers. Use the controls on the connected device to play, pause, or skip selected tracks.

Optical lnput -Detail

Stereo RCA Inputs (Aux ln)- Detail

Documents / Resources

iLIVE SR221E-29-10 29 Inch HDSoundbarwithBluetoothWireless [pdf] Instruction Manual
SR221E, ZJP-SR221E, ZJPSR221E, SR221E-29-10, 29 Inch HDSoundbarwithBluetoothWireless