FS-700 S3 Speaker Stands Triple
Product Information:
The product is the FS-700 S3, which is an assembly kit. It includes
various components such as screws, brackets, and other parts needed
for assembly. The product is designed to be used with dry sand
(Silver / play / silica) and is compatible with models II15954 / 2,
706 S3 / 705 S3, and 707 S3.
Product Usage Instructions:
1. Start the assembly process by gathering the following
components: – 2x ‘a’ – 2x ‘b’ – 2x ‘g’ – 8x ‘c’ – 8x ‘d’ – 1x ‘e’
(3mm) – 1x ‘f’ (4mm) – 8x ‘h’ – 8x ‘i’ – 8x ‘j’ 2. Begin the
assembly by using component ‘a’ followed by component ‘g’ and then
component ‘a’ again. 3. Proceed to connect components ‘f’ and ‘h’,
followed by component ‘g’. 4. Attach component ‘i’ and then
component ‘j’. 5. Continue following the assembly instructions
until all components have been used. 6. Ensure that the dry sand
(Silver / play / silica) is ready for use. 7. Use component ‘e’ to
complete the assembly process. 8. Finally, attach component ‘c’ to
the assembled product. Please note that these instructions provide
a general overview of the assembly process. For more detailed
instructions and diagrams, refer to the full FS-700 S3 Assembly
Instructions manual.
FS-700 S3 Assembly Instructions
1
a 2x
b 2x g 2x
c 8x
d 8x
e 1x 3mm
f 1x 4mm
h 8x
i 8x
j 8x
2
a
g
180º
a
3
f h
g
4
i
j
180º
5
6
Dry sand (Silver / play / silica)
II15954 / 2
7
e
8
c
706 S3 / 705 S3
d f
707 S3
