Torque Usa Hbt100 45.4 Kg Heavy Bag Instruction Manual

HBT100 45.4 KG Heavy Bag

Product Information:

• Product Name: TORQUE 100 LB (45.4 KG) HEAVY BAG
• Model Number: HBT100
• Manufacturer: Torque Fitness
• Contact Details:
  • Email: [email protected]
  • Phone: 763-754-7533
  • Website: www.torquefitness.com

Product Usage Instructions:

Warning:

Before using the heavy bag, please read the instructions
carefully and follow them strictly. Improper installation or use of
the heavy bag can cause injury or damage to the product.

Set-Up (A) (The Attachment Method is Dependent on Your Anchor
Height):

1. Measure the height of the anchor point that the bag attaches
   to. This is the hole that the carabiner (included with bag)
   attaches to. Use method A for all heights at 84 in (213 cm) and
   above. Use B for lower anchor points.
2. Insert the narrow end of the first strap through a D-Ring.
3. Push the thicker end of the strap through the opening of the
   thin end.
4. Pull the thin part of the strap tight, ensuring that the thick
   end of the strap is centered on top. Repeat steps 1-3 for remaining
   three straps.
5. Hang snap-hook from support member so that large end is down.
   Attach first strap to snap-hook.
6. Turn snap-hook so that it faces strap on opposite side of bag
   and attach second strap.
7. Turn snap-hook back so that it faces the third strap and attach
   to snap-hook. Turn snap-hook 180 degrees so that it faces final
   strap and attach to snap-hook. Attach snap-hook to anchor
   point.

Set-Up (B) (Choose Method (A) for Normal Set-Up or Method (B)
for Set-Up on Low Anchor Point):

(Method (B) will raise the height of the bag and is recommended
for use on the Torque Fitness X-Create 8 Foot Upright. Use method
(A) for attaching to X-Create Bridge Systems.)

1. Pull the folded strap through two opposing D-Rings, ensuring
   that the thick end of the strap is centered between D-Rings.
2. Repeat step 1B for adjacent two D-Rings.
3. Turn snap-hook so that the large end is down and hook both ends
   of first strap.
4. Turn snap-hook and hook both ends of second strap. Attach
   snap-hook to anchor point.

Please share your experience with #TorqueFitness and connect
with the Torque network.

TORQUE 100 LB (45.4 KG) HEAVY BAG MODEL: HBT100

Thank you for purchasing the TORQUE 100 LB HEAVY BAG. The Torque Team is happy to assist you with product or program questions. Reach us by email at [email protected] or by phone at 763-7547533. For other training tools and equipment, visit www.torquefitness.com

WARNING
· Heavy bag must be hung from a secure anchor. Follow instructions below. · DO NOT hang body from bag. · DO NOT kick bag with shoes. Bare feet, socks or specialized kickboxing shoes must be
worn for kicking. · Wear suitable clothing when working out. · Be sure to consult a healthcare professional before beginning this or any type of exercise
program.

SET-UP (A) (THE ATTACHEMENT METHOD IS DEPENDENT ON YOUR ANCHOR HEIGHT)
Measure the height of the anchor point that the bag attaches to. This is the hole that the carabiner (included with bag) attaches to. Use method A for all heights at 84 in (213 cm) and above. Use B for lower anchor points.

STEP 1A

STEP 2A

The straps are thicker on one end due to the sewing. Insert the narrow end of the first strap through a D-Ring.
PART NUMBER: 5591901

Push the thicker end of the strap through the opening of the thin end.
REVISION: C

STEP 3A Thick End

STEP 4A

Pull the thin part of the strap tight, ensuring that the thick end of the strap is centered on top. Repeat steps 1-3 for remaining three straps.
STEP 5

Hang snap-hook from support member so that large end is down. Attach first strap to snap-hook.
STEP 6

Turn snap-hook so that it faces strap on opposite side of bag and attach second strap.

Turn snap-hook back so that it faces the third strap and attach to snap-hook. Turn snap-hook 180 degrees so that it faces final strap and attach to snap-hook. Attach snap-hook to anchor point.

Post your experience with #TorqueFitness and connect with the Torque network.

SET-UP (B) (Choose method (A) for normal set-up or method (B) for set-up on low anchor point.)

(Method (B) will raise the height of the bag and is recommended for use on the Torque Fitness X-Create 8 Foot Upright. Use method (A) for attaching to X-Create Bridge Systems.

STEP 1B

STEP 2B

Thick End

Pull the folded strap through two opposing D-Rings, ensuring that the thick end of the strap is centered between D-Rings.
STEP 3B

Repeat step 1B for adjacent two D-Rings. STEP 4B

Turn snap-hook so that the large end is down and hook both ends of first strap.

Turn snap-hook and hook both ends of second strap. Attach snap-hook to anchor point.

Post your experience with #TorqueFitness and connect with the Torque network.

References

• Torque Fitness | Home Gym Training & Olympic Equipment