Inflatable Sleeping Pad with Camping Lantern
User Guide
A BIG THANK YOU
For Buying Our Mountdog Inflatable Sleeping Pad with Camping Lantern!
I want to thank you for supporting our small business growth.
I hope our sleeping pad is everything you’re expected!
If there is anything else we can help with, please feel free to contact our email: [email protected]
We’ll do our best to help you!
| Product Name | Inflatable Sleeping Pad with Camping Lantern |
| Material of Sleeping Pad | Laminated 40D Rip-stop Nylon and the TPU Layer |
| Material of Camping Lantern Inflated Size | PP + TPU + ABS |
| Folded Size | 77.9*23.2*2.75 in / 198*59*7 cm |
| Weigh | 5.9*4.72*11 in / 15*12*28 cm |
| Light Source | 1.83 lb / 830 g |
| Wattage | LED |
| Batteries | 1.5W |
| Waterproof | 3 AAA batteries are required. (Not Included) |
| Package Contents | 1 x Sleeping Pad 1 x Camping Lantern(Batteries Not Included) 1 x Portable Cap for Camping Lantern 1 x Aluminum Carabiner 1 x User Guide 1 x Repair Patch 1 x Carry Bag |
NOTES
Do not use the pad as a floating device.
Do not use a high-pressure pump to inflate the pad.
Do not use sharp objects and keep away from fire.
Do not over-inflate the pad to avoid cracking or tearing.
Do not expose to the sun for a long time.
Do not store the pad in a humid place.
Do not use the pad on hard or rocky surfaces that could tear or puncture it. Make sure to always use the sleeping pad on a tent footprint, a tent floor or a ground blanket.
CARE INSTRUCTIONS
Keep the pad in a contracted state, and then close the valve.
Use a soft brush or other soft cleaning materials, add a mild
detergent for cleaning, or just wipe with a damp cloth.
Rinse the mattress to ensure that there is no detergent residue.
Place it in a ventilated place to dry and avoid direct sunlight After drying, roll it up and pack it into a storage bag.
HOW TO INFLATE
Before inflating, please close the air valve on the pillow.
Open the valve of the air pump.
(Turn the valve to the direction as shown)
Place your foot or hand on the air pump as shown in the figure, and continue to quickly stamp on the air pump to inflate
After fully inflated, close the airs pump valve.
HOW TO DEFLATE AND STORE UP
Open the air valve on the pillow and deflate it.
Fold the sleeping pad lengthwise with the air pump in the middle.
Start to roll up towards the pillow from the air pump, and try your best to exhaust the air in the sleeping pad.
Use a storage bag for storage.
(Note: The valve has a double-decked design. One is for inflating or slow release of air, and the other is for fast.)
HOW TO INSTALL CAMPING LANTERN
- Rotate counterclockwise toward “OPEN→” .
- Take out the camping lantern, then install
- x AAA batteries (Batteries Not Included).
- Align the “|” between “OPEN” and “CLOSE” on the camping lantern with “↓” on the bottom cover.
- Fasten the camping lantern, and then turn it clockwise in the direction of “CLOSE→” to tighten the camping lantern.
HOW TO INSTALL CAMPING LANTERN
Comes with a carabiner, so it can be hung upside down on the tent to get better light when camping outside.
Portable Camping Lantern
Take out the cover from the inner pocket of the storage bag, install the camping lantern on the cover, it can be transformed into a portable camping lamp in seconds and can be carried anywhere.
5 Light Modes
HOW TO FORM A DOUBLE-BED
Comes with side buttons for another inflatable pad, then you get a double bed.
HOW TO REPAIR
In the event of an accidental puncture, cut out a suitable size patch. Make sure you round the corners of your repair patch to avoid pealing. Make sure the area to be patched is clean. Press patch firmly over the puncture.
THANK YOU FOR CHOOSING OUR PRODUCTS.
FOR MORE PROFESSIONAL AND HIGH-QUALITY PRODUCTS, PLS SEARCH ‘MOUNTDOG’ ON AMAZON.
