F01A-1 Remote control Car
Product Information:
- Frequency: 2.4G
- Battery parameters:
- Remote control: 2 x 1.5V AA
- Car: 3.7V Li-ion
- Type: F01A
- FCC ID: 2AZFNF01A-1
- Manufacturer Address: ZHONG JUN TOYS FACTORY, CHENGHAI
DISTRICT, SHANTOU CITY, GUANGDONG PROVINCE, CHINA
Product Usage Instructions:
Car:
- Remove the battery compartment cover.
- Place one grain of 3.7V Li-ion battery in the correct position
when using. - Replace the battery compartment cover.
Remote Control:
- Remove the screw.
- Remove the battery compartment cover.
- Place two grains of 1.5V AA battery in the correct position
when using. - Replace the battery compartment cover and screw.
FCC Statement:
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Caution:
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver. - Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for
help.
Important Announcement:
Radiation Exposure Statement: The device has been evaluated to
meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
User’s manual
User’s manual
Frequency
2.4G
Battery parameters Remote control 2 x 1.5 V AA
Car 3.7V
Type
F01A
FCC ID: Manufacturer Address
2AZFNF01A-1
ZHONG JUN TOYS FACTORY CHENGHAI DISTRICT, SHANTOU CITY,
GUANGDONG PROVINCE,CHINA
The packaging has to be kept since it contains important information.
Car 1. Remove the battery compartment cover. 2. Place one grain of 3.7V Li-ion battery in the correct position when using . 3. Replace battery compartment cover . Remote Control 1. Remove the screw. 2. Remove the battery compartment cover. 3. Place two grain of 1.5V AA battery in the correct position when using . 4. Replace battery compartment cover and screw.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference
received,
including
interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible
for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. -Consult the dealer or an experienced radio/TV technician for help important
announcement
Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
