Brightk Xhp70-s High Lumen Flashlights User Guide

XHP70-S

Product Features

Operation Instructions

Battery installation (Make Sure, the flashlight is turned off.)

1. Turn counterclockwise to unscrew the tail cap
2. Distinguish the positive and negative poles of the battery
3. Insert the battery with the positive side facing inward
4. Turn clockwise to tighten the tail cap.

Ensure batteries are inserted with the positive (+) end, pointing to the head.
The Flashlight will not operate with incorrectly inserted batteries.

Switch (On/Off and mode change)
Every first click ON(high mode), next click change mode to medium, next click change mode to low, next click change mode to strobe, next click change mode to SOS, and after that next click power off.
COULD ALSO LONG-PRESS TO POWER OFF IN ANY MODE.

Protected Battery Pack
Built-in Low and High Voltage Cut off for Long Life of Battery.

Charging/Battery Power Status Flashing LED Indicators.

Recharge the battery when the last Power indicator Start Glowing.	USB Charging (Micro USB Cable) The cover is just stuck. If it falls off, it will affect the waterproof effect of the charging port. Please open it carefully!

WARNING

1. Please don’t point the flashlight in your or others’ eyes directly.
2. Direct exposure to LED lights can cause irreparable harm to the eye’s retina.
3. Waterproof IP65 is not suitable for water diving.
4. For best performance, please use Flashlight with battery pack only.
5. Charge the battery pack fully for the first time use.
6. Keep away from flammable and explosive materials when charging.
7. Please use the product once in 3 months and charge for the long life of the battery.