Anker Soundcore Boost A3145 User Manual

Anker Soundcore Boost A3145 User Manual

ANKER logo

Soundcore Boost
USER MANUAL

ANKER Soundcore Boost A3145

Charging your Soundcore Boost

ANKER Soundcore Boost A3145 -icon

  • To preserve battery lifespan, fully charge at least once every 45 days.
  • To prevent damage, use the provided USB-C cable.

ANKER Soundcore Boost A3145 -

Powering On/Off

Press the power button to power on or off.

ANKER Soundcore Boost A3145 -Powering On

Bluetooth Pairing

ANKER Soundcore Boost A3145 -Bluetooth Pairing

ANKER Soundcore Boost A3145 - Steady blueRapidly flashing blueBluetooth pairing
ANKER Soundcore Boost A3145 -icon2Steady blueBluetooth connected

 

ANKER Soundcore Boost A3145 -icon• Press and hold the power button for more than 4 seconds to disconnect the currently connected device and re-enter the pairing mode.
• When powered on, your Soundcore speaker will automatically connect to the last successfully connected device if available.
• The Soundcore speaker will automatically power off 10 minutes after Bluetooth is disconnected.

Button Controls

Play / PauseANKER Soundcore Boost A3145 -icon4Press
Next trackANKER Soundcore Boost A3145 -icon4Press twice
Previous trackANKER Soundcore Boost A3145 -icon4Press thrice
Volume up / downANKER Soundcore Boost A3145 -icon6Press
BassUpANKER Soundcore Boost A3145 -icon87Press
ANKER Soundcore Boost A3145 -icom12
Answer / End a callANKER Soundcore Boost A3145 -icon4Press
Put the current call on hold and answer a new incoming callANKER Soundcore Boost A3145 -icon4Press
Transfer a call between the speaker and mobile phoneANKER Soundcore Boost A3145 -icon4Press and hold for 2 seconds
Reject a callANKER Soundcore Boost A3145 -icon4Press and hold for 2 seconds
ANKER Soundcore Boost A3145 -icon45
Activate Siri or other voice

assistant softwar

ANKER Soundcore Boost A3145 -icon4Press and hold for 2 seconds

TWS (True Wireless Stereo) Mode
Two identical Soundcore speakers (A3145) can pair with each other for stereo sound.

  1. On both Soundcore speakers, press the TWS button to enter TWS pairing mode.
  2. In TWS mode, connect either speaker with your Bluetooth-enabled device. The two speakers can play music on the left channel and right channel.

ANKER Soundcore Boost A3145 -TWS (True Wireless Stereo)

ANKER Soundcore Boost A3145 - Steady blueRapidly flashing whiteTWS pairing
ANKER Soundcore Boost A3145 -icon2Steady whiteTWS connected

 

ANKER Soundcore Boost A3145 -icon• To break the connection, tap your NFC device again onto the NFC detection area of your Soundcore speaker.

Charging USB Devices

This Soundcore speaker can charge your USB devices with its built-in battery.

ANKER Soundcore Boost A3145 -Charging USB Devices

APP

Download the Soundcore App for an enhanced product experience.

  •  Check product information
  • Customize EQ settings
  • Show battery status
  • Adjust the volume
  • Set Auto Power Off
  • Firmware update

ANKER Soundcore Boost A3145 -gh

Specifications

ANKER Soundcore Boost A3145 -iconSpecifications are subject to change without notice.

Input (USB Type-C)5 V 2 A
Output (USB Type-A)5 V 1 A
Audio output10 W × 2
Driver size1.75” x 2
Frequency response20 Hz – 20 kHz
Impedance
Battery capacity5200mAh
Charging time4-6hours
Playtime (varies by volume level and content)12hours
Waterproof levelIXP7
Bluetooth versionV5.0
Bluetooth range20m/66ft

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals