Hailey Home Tl1731 Cora Brushed Brass Table Lamp With Fabric Shade Instruction Manual

TL1731 Cora Brushed Brass Table Lamp with Fabric Shade
Instruction Manual

IMPORTANT SAFETY INSTRUCTIONS

• These instructions are provided for your safety. Please read carefully and completely before beginning the assembly and installation of this lighting fixture.
• This lighting fixture is intended for indoor use only.
• Always place lighting fixture on a solid, level surface.
• For use with E26 (medium) base light bulbs only.
• To avoid the risk of fire, do not exceed the maximum wattage of 60W incandescent bulb , or 9W LED bulb , or 13W fluorescent (CFL) bulb , or 9W self-ballasted LED  bulb . (Bulbs not included)
• This lighting fixture has a polarized plug (one prong is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted.
  Do not alter the plug. Do not attempt to bypass this safety feature.

WARNINGS:

• To reduce the risk of fire, electrical shock, or personal injury: always turn off and unplug this lighting fixture and allow it to cool before attempting to replace the light bulb.
• Do not touch light bulb while fixture is turned on.
• Keep flammable materials away from this lighting fixture.
• Never look directly at a lit bulb.

CARE INSTRUCTIONS

• Unplug lamp before cleaning.
• Wipe clean with a soft, dry cloth or static duster.
• Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fixture’s finish

PRE-ASSEMBLY

Carefully remove all parts and hardware from carton, along with any protective plastic packaging. The lampshade may be covered with a plastic film that should be removed before use.
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
* Part E (Lampshade Ring) may come pre-installed to Part C (Socket).
Unscrew Part E before installing Part D (Lampshade), then reinstall Part E to secure.

PARTS INCLUDED

(A) Body
(B) On/Off Switch
(C) Socket
(D) Lampshade
(E*) Lampshade Ring

For use with light bulbs with a E26 (medium) base.
DO NOT EXCEED THE SPECIFIED WATTAGE.

Made in China