PT694BT
Wi-Fi Wireless BT Home Theater Receiver
Surround Sound Stereo Amplifier System with 4K Ultra HD Support, AM/FM Radio (1000 Watt MAX)
USER MANUAL
Safety Precautions
A. Avoid opening the cover or back panel. Do not open the cover, fix or touch the inner parts. No user-serviceable parts inside, refer servicing to qualified service personnel.
B. Protect voltage line. Avoid high pressure and to be stomped on, do riot pull, and push excessively.
C. Please put on this unit in the windy place, avoid direct sunshine, and nearing heater. Place the unit in a location with adequate air circulation.
D. Do not interfere with its proper ventilation; this will cause the internal temperature to rise and may result in a failure.
C Avoid metals dropping in, like needles, hairpins, and coins, otherwise, the unit will get short and out of work.
F. Be sure to set the line voltage to 20VAC 60Hz if you are not sure of the type of power supply, consult your appliance dealer or local power company.
For MAINS powered apparatus and for apparatus producing internal voltages greater than 35V (peak) a.c. or d.c., having no protection against splashing water according to annex A, the instructions for use shall state that the apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus
Front Panel
- Power Switch
- USB Input jack
- DIGITAL INPUT KEY
Press DIGITAL INPUT key to select COAXIAUOPTICAU DIGITAL 1/DIGITAL 2/ DIGITAL 3/ and USB digital input. - ANALOG INPUT KEY
Press the ANALOG INPUT key to select BT/DVD/CD/AUX and FM analog input. - +
- +
- /CH- //AUT0//CH+
Use these three keys to operate USB/BT and Tuner functions.
a.In a USB or Bluetooth channel, press these three keys to finish previous/ play/pause and next functions. b. In AM/FMchannel, press the AUTO key for broadcast stations’ auto-memory. - ARC
- CH. MODE Press CH.MODE key to select different channel modes.
- MENU Press the MENU key and rotate the VOLUME/ MULTI knob to adjust the main channel BALANCE/main channel TREBLE/ main channel BASS/surround channel VOLUME/center channel VOLUME and subwoofer channel VOLUME.
- MIC MENU When inserting the microphone, press the MIC MENU key and rotate the VOLUME/MULTI knob to adjust MIC VOLUME/MIC ECHO and MIC DELAY.
- MIC1/MIC2 Microphone input jacks.
- VOLUME/MULTI
- VFD display
Rear Panel
- AM/FM ANTENNA
- AUX AUDIO INPUT
- CD/DVD AUDIO INPUT
- ACTIVE SUBWOOFER OUTPUT
- PASSIVE SUBWOOFER OUTPUT
- CENTER CHANNEL OUTPUT
- SURROUND RIGHT CHANNEL OUTPUT
- SURROUND LEFT CHANNEL OUTPUT
- FRONT RIGHT CHANNEL OUTPUT
- FRONT LEFT CHANNEL OUTPUT
- POWER SOCKET
- COAXIAL INPUT
- OPTICAL INPUT
- HD 1 INPUT
- HD 2 INPUT
- HD 3 INPUT
- HD OUTPUT (WITH ARC)
Remote Control Function Introduction
- Standby
- Analog input
- Digital input
- Dsp mode
- Channel select
- Bass +
- Treble +
- Bass –
- Center volume +
- Left surround Volume +
- Right, surround volume –
- Subwoofer volume –
- Main volume +
- Balance left
- Bluetooth channel
- ARC
- USB/BT next
- USB/BT’s previous
- AM/FM tuning +
- AM/FM tuning –
- MIC volume +
- MIC volume –
- MIC echo +
- MIC echo –
- Mute
- Loudness on
- Loudness off
- HiFi erode
- Treble –
- Reset
- Right surround volume +
- Right, surround volume –
- Center volume-
- Subwoofer volume +
- Balance right
- Main volume –
- AM/FM
- USB/BT stop
- USB/BT play/pause
- AM/FM channel –
- AM/FM channel +
- AM/FM auto
- AM/FM memory
- MIC delay +
- MIC delay –
Operating Instructions
Preparation before operation
- This product must be placed on a flat, solid object to ensure that it has sufficient capacity to support the product without falling.
- Please use this product according to the safety requirements in front of this manual and connect with other products (TV, speaker, DVD player or player) as required.
- Open the audio source device connected to this product.
- Press the power switch button on the panel to turn ON the power.
Operation
Channel Selection
The product has 11 pairs of channel input, digital channel input, and analog channel input: Select HD 1-3, OPTICAL, COAXIAL, and USB digital input by pressing the digital input button on the panel or remote control.
Select AUX, BT, DVD/CD and am/FM by pressing the ‘analog input’ button on the panel or remote control.
Channel Mode
Press “channel mode.; select2.1 or 5.1 channels on the panel or remote control.
Volume Adjustment
Total volume adjustment:
Rotate the “VOLUME/MULTI” VOLUME/multi-function adjusting knob on the panel,
or press the ‘total VOLUME +/-‘ button on the remote control to adjust the VOLUME.
Center, surround, heavy bass channel volume adjustment:
Press “main menu” on the panel, adjust the screen to show “CV xx”, “the SRV xx”, “xx” and “SVVVxx SLV”, then rotate the “MULTI’ VOLUME/multifunctional adjustment button on the panel, adjust the volume of the center channel, right surround channel, left surround channel and the heavy bass channel.
Press the “Center volume surround volume +/-. and “heavy bass el, button on the remote control, adjust the volume of Center, surround, and heavy bass. Channel.
MAIN CHANNEL TONE AND BALANCE
Press the ‘MENU’ on the control panel of the receiver system. Adjust the display TRExx” BASSxx. and ‘L– //–R; ‘VOLUME/MULTI’ is a volume/Multi-function knob. This knob can adjust the main channel bass/Treble volume level and Left/Right channel volume balance.
USB OPERATION
Press the ‘Input’ button on the remote control or on the control panel of the receiver system. Select ‘USB’mode. Then insert a USB flash disk. This unit can automatically play the USB flash disk file. Then press the,, button to operate the corresponding function. Supports WMA/MP3/APE/PLAC files
Note:
- Because video files continuously update, this product can’t play all format files.
- If the USB flash disk doesn’t work on USB mode. The operation is invalid.
MIC
- Insert MIC. The display will show ‘MIC ON’.
- Press the ‘MIC MENU’ on the control panel of the receiver system. Rotate the ‘VOLUME /MULTI’ knob. Adjust MIC volume. Press the ‘MIC VOL+/-“MIC ECH0+/-“MIC DELAY,-/-” on the remote control. Adjust the microphone Master/echo/delay volume level.
HIFI
- In ANALOG INPUT mode, press the ‘HIFI’ button on the remote control. Output is 2.0ch stereo audio mode.
HD
- Connect audio equipment (Blu-ray DVD player, Set Top Box ) with HO output by using HD cable.
- Press the ‘Digital input’ on the remote control or on the control panel of the receiver system. Select the appropriate channel.
- Press the ‘CH. MODE’ on the remote control to change the channel of the broadcast program.
- HD with ARC function. Set the TV audio in ‘External speaker’ or ‘Audio system; press ‘ARC ON’ on the remote control. The display will show ‘ARC on; This amplifier can play the TV audio. Press ‘ARC off; The amplifier goes back to default
Note: HD Version 1.4B. Support 3D 4K.
Make sure the TV has ARC function and set the TV in ARC ON state.
Wireless BT Function
- The receiver connects to your Bluetooth-enabled device, allowing the system to receive your wireless Bluetooth signal and stream audio to any connected speaker system.
- Press the ‘ANALOG INPUT on the remote control or on the control panel of the receiver system, then enter to ‘Br mode–as indicated on the display screen.
- Ensure Bluetooth is activated on your device and search for Bluetooth Network Named: PYLEUSA
- No password is required for connecting.
ARC (Audio Return Channel) Function
The ARC (Audio Return Channel) function makes it easy for the PT694BT to play audio from any TV with a single HD cable. It can be adjusted either on the front control panel or via the included remote control.
Enable your TV to send audio signal upstream to a connected speaker system or AV receiver while eliminating additional cable connections and clutter from an optical audio cable (S/PDIF). ARC audio transmission links your speaker output to your television controls, meaning you do not need an external/additional remote or interface to configure audio levels. Enjoy an optimal multimedia home theater experience by connecting your television and Hi-Fi equipment into one, seamless entertainment system.
FM, AM RADIO
Press ‘AUTO “TUNE+/-” CH+/-. button on the remote control. Operate automatic search and save station, manually save and select the stored station function.
DSP Sound Field Control
Press DSP. or ‘CH MODE’ on the remote control. 7 different sound field effects can be selected. (LIVE/HALL/DISCO/CHURCH/ROCK/JAZZ/CLASS)
NOTE: Pressing those buttons on the digital input channel is invalid
LOUD
Press ‘LOUD ON’ on the remote control. The low frequency of this unit can be increased appropriately at low volume. Then press.LOUND OFF to cancel this function.
RESET
Press ‘The RESET button on the remote control to restore to the factory setting state.
MUTE
Press the ‘MUTE’ button on the remote control to turn the ON or OFF MUTE function.
STANDBY
Press the’ STANDBY’ button on the remote control to turn ON the standby state. Press again to cancel standby mode.
Troubleshooting
Problem | Probable Cause | Solution |
No display | The power socket is in poor contact or without electricity | Check the power supply and plug the socket. |
There’s a display but no sound output | 1. The speaker wiring is wrong. 2. The playback source doesn’t correspond to the selected signal state 3. The volume level is in the lowest output state. 4. MUTE is activated | 1. Connect the speaker line according to the wiring diagram 2. Select the input state which is playing 3. Turn the main volume & adjust the knob clockwise. 4. Disactivate MUTE |
The remote control doesn’t work | 1. The remote transmitter window is not aimed at the local receiving window. 2. There are obstacles between the unit and the remote control 3. Drained remote control batteries | 1. Aim at the host receiving window. 2. Remove obstacles 3. Replace the new battery |
Out of control | Being disturbed or improperly operated | Turn it OFF and then turn it ON |
sound distortion | The main volume adjustment is too much | Turn down the main volume |
The channel sound is wrong | The Channel sound mode is not correct | Press ‘CH. MODE’ on the panel or remote control |
Music files on USB can’t be played for a long period of time | The USB files are not supported | Delete unsupported files |
The phone cannot transmit audio to the amplifier via Bluetooth. | 1. The Bluetooth function of the mobile phone is not open. 2.No music is played on the phone. 3. Amplifier Bluetooth is not paired with mobile phone Bluetooth. 4. Incorrect amplifier input channel 5. Bluetooth can’t connect. | 1. Turn ON Bluetooth 2. Open the phone and play music 3. Rematch Bluetooth connection 4. Switch the amplifier input into the ‘BT’ channel. 5. Turn off other Bluetooth devices |
If you are still experiencing issues, please contact your authorized local dealer or contact us at www.PyleUSA.com.
PT694BT
Hi-Fi Wireless BT Home Theater Receiver
Surround Sound Stereo Amplifier System with 4K Ultra HD Support, AM/FM Radio
(1000 Watt MAX)
Features:
- 2 Channel Receiver System
- AV (AudioNideo) Stereo Amplifier
- Hi-Fi Home Theater Surround Sound
- Built-in Bluetooth Wireless Audio Streaming
- Next-Gen Audio DSP Sound Processing Technology
- 4K Ultra HD TV Pass-Through Support
- 3D Video & Blu-Ray Video Pass-Through Support
- Front Panel Digital VFD Display
- AM & FM Stereo Radio
- Connect & Stream Audio from External Devices
- MP3 Digital Audio Support
- USB Flash Drive Reader
- Connection Interface: (3) x HD, RCA (L/R), Speaker Binding Posts, Optical / Coaxial / Digital Audio
- HD Output + Dedicated RCA Subwoofer Output
- (2) 1/4″-inch Microphone Inputs
- Independent Input Source Selection
- Digital Graphic Audio Output Level Display
- Mic Echo, Delay, Volume Control Adjustment
- Over Current, Short Circuit, and Over Voltage Protection
What, in the Box:
- AV Receiver
- Remote Control
- AM & FM Antennas
Wireless Bluetooth Connectivity:
- Simple & Hassle-Free Pairing
- Instantly Receives Wireless Music Streaming
- Works with all of Today, Latest Devices
Smartphones, Tablets, Laptops, Computers, etc.)
- Bluetooth Version:4.0
- Bluetooth Network Name:’PYLEUSA’
- Wireless Range: 30’+ ft.
Technical Specs:
- Power Output: 1000 Watt MAX
- Amplifier Receiver Type: 5.2-Channel
- Speaker Impedance:4-16 Ohm
- S/N Ratio: >80dB
- H.D.: <0.0596
- Frequency Response: 20Hz-20kHz
- Radio Station Memory: 30 Presets
- DSP/EQ: Live, Hall, Disco, Church, Rock, Jazz, Classic
- Digital Audio File Support: MP3 / WMA
- Maximum USB Flash Support: Up to 16GB
- Battery Operated Remote Control, Requires (2) x ‘AAA’ Batteries, Not Included
- Power Cable Length: 3.9ft.
- Power Supply: 120VAC 60Hz
- Total Unit Dimensions (L x W x H): 9″x 12.8″x 5.3″-inches
WARNING This Product. can expose You to a chemical or group of chemicals,.ich may include other reproductive harm. For more info, go to https://www,65warnings.ca.gov/.
IMPORTANT SAFETY INSTRUCTIONS
- Read these instructions.
- Keep these instructions.
- Heed all Warnings
- Follow all instructions
- Do not use this apparatus near water
- Cleat only with a dry cloth.
- Do not block any ventilation openings InnaL in accordance with the manufacturer’s instructions.
- Do not install, near am- heat sources rich as radiators. heat registers. stoves. or other apparatus including amplifiers) that produce heat
- Do not defeat the safety purpose of the polarized or grounding – rape p:ig A Poland plug has two blades with one ender than the other A pound type plug has two blades and a third gratin., pro, The wide blade or the thud prong are provided for your safety When the provided plug does not fit roan rota outlet consult an electrician for replacement of the obsolete outlier
- Protect the power cord from the berm walk. oct or pinched particularly at plugs. convenience receptacles. and the point where they mat from the apparatus.
- Only use attachments accessories expected by the manufacturer
- Use only with a cart. stand. Tripodi bracket. or table specified by the mammoth cruiser. or sold with the apparatus When a cm is used use caution when mot-, the cart apparatus combuiMon to am. injury from ap-over Unplugs the appear. Chin, hemming storms or when unused for long pertain of nine
- Refer all servicing to qualified sert-are per,ornel Sert-thing required when the apparatus has been damaged in any way. such as power-supply cord ere plug is damaged. hand has been sped or objects have fallen. moo, the apparatus has been exposed to rain or caricature. does not operate corm..y. or has been dropped
FCC Warnings
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could smid the user’s authority to opera:e the equipment.
NOTE: This equipment has been tested and found to comply with die limits for a Class B digital device. pursuant to Part 15 of the FCC Rules. These limits are designed. to pride r.sonable port. action against harmful interference in a residential installation. This equipment genera.. uses. ani can radiate ratho frequency energy and. if not installed and used in accordance with the instructions. may cause harmful interference to ratho commute. tions. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause hannful interference to radio or television reception. which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:
- Recorient or relocate the receiving antenna.
- Increase the separation between the equipment.t and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is a comma.
- Consult the dealer or an experienced radio TV technician for help.
Additional Warnings
- The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids_ such as vases shall be placed on the apparatus.
- The mains plug is used as a disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the main socket cutlet completely.
- The battery shall not be exposed to excessive heat such as.. fire or the like
- Caution marking is located at the rear or bottom of the apparatus.
- The matting information is located at the rear or bottom of the apparatus.
WARNINGS AND PRECAUTIONS
- CAUTION: TO PREVENT ELECTRIC SHOCK. MATCH WIDE BLADE OF PLUG TO WIDE SLOT. FULLY INSERT.
- WARNING: To reduce the risk of fire or electric shock. do not expose this apparatus to rain or moisture.
- CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
- WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- DARNING: Do not place this unit directly onto furniture surfaces with any type of soft. porous. or sensitive finish. As with any rubber compound made with oils. the feet could cause marks or staining where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and ‘or staining.
- WARNING: The use of this unit near fluorescent lighting may cause interference regarding the use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting. as it may be the cause.
- CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
- WARNING: There is a danger of explosion if you attempt to charge standard Alkaline batteries in the lira Only use rechargeable NiMH batteries.
- WARNING: The remote control’s button cell battery contains mercury. Do not put M in the trash. instead, recycle or dispose of hazardous waste
- WARNING: Lithium batteries. like all rechargeable batteries are recyclable and should be recycled or disposed of in the normal household waste. Contact your local government for disposal or recycling practices in your area. They should never be incinerated since they might explode.
- WARNING: Shock hazard – Do Not Open.
The mains plug is used as a disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the man completely. the mains plug should be disconnected from the mains socket outlet completely.
Do not mix old and new batteries.
Do not mix alkaline. standard (carbon-zinc). or rechargeable (ni-cad. ni-me. etc) batteries.
No mccle baterias viejas y nuevas.
No mexle baterias aleahnas, estandar (earbono,inc) o recargables (ni-cad, ni-mh, ere.).
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user-accessible parts.
The lightning flash with an arrowhead symbol. within an equilateral triangle, is intended to alert the user to the presence of but insulated –dangerous voltage– within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements.
The device can be used in mobile(min20cm) exposure conditions.
WARNING This product can expose you to a chemical or group of chemicals, which may include “Lead (Pb)” which is known in the state of California to cause cancer, birth defects, or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.
Documents / Resources
PYLE PT694BT HiFi Wireless BT Home Theater Receiver [pdf] User Manual PT694BT, 2A5SQ-PT694BT, 2A5SQPT694BT, PT694BT HiFi Wireless BT Home Theater Receiver, HiFi Wireless BT Home Theater Receiver |