ats-2020 Kids Karaoke Machine Manual
- Thank you very much for purchasing our company’s products this time.
- Be sure to read the instruction manual and use it correctly before using it.
- After reading, be sure to keep it where the user can see it everywhere.
Open the backpack
The straps are fastened at both ends of the handle
The microphone is inserted in the microphone hole of the singing machine
Bluetooth Connection
Turn on the kids’ karaoke machine and enter Bluetooth mode by default. Turn on Bluetooth on the phone, just search”ats-2020″ connection. When we connect successfully, we can play music.
TF card Mode
When insert in TF card and machine changed as TF mode, we can play music.
USB Mode
When insert in USB and machine changed as USB mode , we can play music.
Charge
Charging by inserting a power supply (5V1A).
| No. | Name | Show | Function |
| 1 | on/off |  | turn on or turn off |
| 2 | DCSV port |  | DCSV charging in port |
| 3 | USB port |  | insert in USB to play music |
| 4 | TF port |  | insert in TF card to play music |
| 5 | voice changer |  | you can press 3 different voice when insert in microphone to sing songs |
| 6 | next/vol+ |  | long press to next song/short press to increase volume |
| origin / accompaniment |  | short press the key to enter the karaoke origin/accompaniment mode | |
| 8 | play/pause |  | short press the key to play/pause |
| 9 | mode |  | Change models with BT/USB/TF card when insert in USB/TF card |
| 10 | previous/vol- |  | Long press to previous song /short press to decrease volume |
| 11 | cheer/booing |  | short press to cheer/long press to booing when insert in microphone to sing |
| 12 | mic1 |  | first microphone hole |
| 13 | mic2 | | second microphone hole |
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
