Hatco Wm Flip Waffle Maker Fwm Series Instructions

WM Flip Waffle Maker FWM Series

Product Information

The Hatco Flip Waffle Maker is a kitchen appliance designed to
make delicious waffles. It belongs to the FWM Series and is
equipped with various replacement parts. It is important to locate
the Specification Label on the unit to determine the exact Model
Name and electrical specifications. This information is necessary
for identifying the correct replacement parts.

Using replacement parts other than those supplied by Hatco
Corporation may result in damage to the unit or injury to
personnel, and it will also void all warranties. Therefore, it is
crucial to use only genuine Hatco Corporation replacement
parts.

Product Usage Instructions

1. Locate the Specification Label on the back of the unit.
2. Identify the Model Name and electrical specifications from the
   Specification Label.
3. Refer to the exploded view illustration(s) in the user manual
   to find the exact location of the Specification Label.
4. Check the Replacement Parts List provided in the user
   manual.
5. Find the specific part number needed for replacement based on
   the Model Name and electrical specifications.
6. Note the quantity required for each replacement part.
7. Review the Item Description for each replacement part to ensure
   compatibility.
8. Order the genuine Hatco Corporation replacement parts using the
   identified part numbers.
9. Follow the wiring diagram provided in the user manual for
   proper installation, if applicable.
10. For international models, refer to the shaded areas in the
    Replacement Parts List for additional part information.
11. Take note of the manufacturing date code in the serial number
    for reference.

By following these instructions, you can ensure that your Hatco
Flip Waffle Maker operates smoothly and safely, providing you with
delicious waffles for years to come.

IMPORTANT NOTE: Locate the Specification Label on unit to determine exact Model Name and electrical specifications. This information is needed to identify the correct replacement parts. See exploded view illustration(s) for Specification Label location.
CAUTION
Use of replacement parts other than those supplied by Hatco Corporation may result in damage to unit or injury to personnel and will void all warranties.

Flip Waffle Maker

FWM Series

Model Name

Page

FWM-1B ……………. 2­3

Replacement Parts List
© 2022 Hatco Corporation

Hatco Flip Waffle Maker
FWM Series
1 2 3 4
5 6 7 8
9 10

11 12 13 14 Specification Label on back of unit.
15 16 17 18

2

FWMRP-0422

Item Description 1 Plate Support 2 Yoke Cover 3 Pivot Yoke Cover 4 Waffle Plate Cover 5 Handle 6 Beligian Waffle Plate 7 Heating Elements 120 V 100 V 220­240 V 8 Probe 9 Bottom Cover 10 Rubber Feet 11 Control Label 12 Control Board

Part No. 02.01.524.00 04.44.359.00 04.44.352.00 04.44.351.00 05.30.379.00 04.44.351.00
02.05.1121.00 02.05.1123.00 02.05.1122.00
02.01.602.00 04.44.360.00 05.30.247.00 07.01.523.00 02.01.524.00

Qty. 1 1 1 2 2 2
2 2 2 1 1 4 1 1

Item Description 13 High Limit 14 Magnet Sensor 15 Power Cord and Plug
NEMA 5-15P CEE 7/7 Schuko BS-1363 CCC 10A AS 3112 PSE 16 Cord Grip 17 Power Switch 100 and 120 V 220­240 V 18 Main PCB
Wiring Diagram

The shaded areas contain part information for International models only.

Part No. 02.16.216.00 02.01.567.00

Qty. 1 1

02.18.507A.00

1

02.18.038.00

1

02.18.068.00

1

02.18.1053.00

1

02.18.1004.00

1

02.18.686.00

1

02.20.369.00

1

02.19.239.00

1

02.19.240.00

1

02.01.598.00

1

10-01-1655

NOTE: The last four digits in a ten digit numerical serial number are the manufacturing date code. Example: Serial number 9625061931 has a date code of “1931” which indicates the following: 1931
Week Thirty-One Year 2019

FWMRP-0422

3