Nhbs Compact Led Skinner Moth Trap Instructions

NHBS MOTH TRAP Instructions for assembly

1. Assemble the trap container by attaching the walls and base together using the Velcro strips.
2. Ensure the base is attached on the inside of the trap to prevent rain from entering.
3. Slide the wall supports onto the container walls without baffles (sloping panels).
4. Place egg boxes or similar inside the trap and flip the baffles over so that they rest on the wall supports.
5. Slide the light holder into the corresponding slots on the wall supports.
6. Screw-in the blacklight bulb tightly to ensure a waterproof seal.
7.  Plug the trap into the main power source.

Please note: When operating this trap please take care to not over-tighten the bulb as this can damage the contacts within the bulb holder.