NB-FFP30-Copper Copper Firebowl Fire Pit with Handles

Copper Firebowl Fire Pit with Handles

Product Information

The Copper Firebowl Fire Pit with Handles (NB-FFP30-Copper) is a
stylish and functional fire pit that is perfect for outdoor
gatherings. It comes with various parts including a fire bowl, fire
bowl base, spark screen, log grate, poker, and hardware. The fire
pit is made of copper which makes it durable and resistant to rust
and corrosion. The handles on the side of the fire bowl make it
easy to move around, and the spark screen helps prevent sparks and
embers from flying out of the fire pit.

Product Usage

1. First, lay out all the parts and place the mounting port of the
   fire bowl base upwards on the ground. This should look like Figure
   1 in the manual.
2. Next, center the bowl over the bowl base and align the
   underside bowl connector nut to the base bolt. Tighten it by hand.
   This should look like Figure 2 and Figure 3 in the manual.
3. Align the screen clip bolt to the bolt hole on the interior of
   the bowl rim. Secure the screen clip bolt by twisting it into
   place. Repeat for the remaining two screen clip bolts. Place the
   log grate into the bowl. This should look like Figure 4 and Figure
   5 in the manual.
4. Place the spark screen on the assembled fire bowl unit. The
   fire pit is now ready for use. This should look like Figure 6 in
   the manual.

WARNING: To prevent property damage or injury,
do not use this fire pit near wood siding, flammable liquids, or
vapors. Always use caution when using this product and keep a fire
extinguisher nearby.

Copper Firebowl Fire Pit with Handles
NB-FFP30-Copper

Parts

# Description

Qty

A Fire Bowl

1

B Fire Bowl Base

1

C Spark Screen

1

D Log Grate

1

E Poker

1

F Hardware

1

1. Lay out all the parts , place mounting port of fire bowl base upwards on the ground (Figure 1).
Figure 1

3. Align screen clip bolt to the bolt hole on interior of bowl rim . Secure screen clip bolt by twisting into place.Hand tighten only. Repeat for remaining two screen clip bolts (Figure 4). Place log grate into the bowl (Figure 5).

Figure 4

Figure 5

2. Center bowl over bowl base. Align underside bowl connector nut to base bolt ,and tighten it by hand (Figure 2Figure3).

Figure 2

Figure 3

4. Place spark screen on assembled fire bowl unit, now it’s ready for use (Figure 6) .
Figure 6

WARNING
· Outdoor use only. Never use in enclosed area. Use in unventilated areas will endanger your life.
· Do not use this unit on or near combustible surfaces or structures such as wood decks, dry leaves or grass, vinyl or
wood siding, etc.
· Use on level, non-combustible surface only. · Keep away from all combustible materials including gasoline
and other flammable liquids and vapors.
· Never use flammable accelerants, such as: gasoline, alcohol, paint thinners, kerosene, etc. to start a fire. Serious injury or
property damage could result.
· Screen lifting tool may become hot when in use! Failure to wear protective gloves may lead to injury.
· Always wear fire-resistant gloves when handling hot metal screen and lifting tool.
· Keep away from house, garage, balconies, or overhangs. · Avoid using during dry or windy conditions. · Keep out of reach of children. · Do not overfill or use to burn leaves or trash. · Exercise the same care you would with an open fire. · Never leave unit unattended while hot or in use. · Completely extinguish fire before leaving. · Ashes can remain hot for a long time after fire is extinguished. · Dispose of cold ashes properly. · Any modification of the unit will void product warranty. Contact local authorities regarding possible burn restrictions before using product.