SYBO SB-6000S Stainless Steel Soup Kettle
SYBO SB-6000S Stainless Steel Soup Kettle
SAFETY TIPS
Read this instruction manual before using and keep them available at all times!
- The device must not be operated by children, as well as persons physically, sensorially, or mentally impaired, or having low experience and/or knowledge, unless they are supervised or instructed in range of safe operation and resulting hazards. Children should be continuously supervised in order to avoid playing with the device. Cleaning and maintenance must not be realized by children left without supervision. Children must not be present in the vicinity of the device and the supply cable.
- Never leave the device unattended during its operation.
- The device is not designed for operation with external timer switch or remote control.
- The device must be operated only in perfect technical condition.
- Prevent access of children to the package materials like plastic bags and foamed polystyrene elements. Suffocation hazard!
- Only a qualified technician and using original spare parts and accessories should carry out repairs and maintenance of the device. Do not attempt to repair the device yourself. Do not use any accessory or spare parts that have not been recommended by the manufacturer. These can be dangerous for the user or lead to damages of the device or personal injury, and further, the warranty expires.
- To prevent hazards and to ensure optimum efficiency, no modifications or alterations to the device that are not explicitly approved by the manufacturer may be undertaken.
OPERATION INSTRUCTION
INSTRUCTIONS FOR THE WET HEAT SOUP KETTLE Specification:
- CAPACITY: 10L
- VOLTAGE: 220V-240V/50HZ 400-475W
- WEIGHT: 8Kgs
- DIMENSION: 39cm High 5cm Dia
OPERATING AND MAINTENANCE
- Plug unit into correct electrical socket.
- Use with WET HEAT ONLY. Add 0.6L of water between the stainless steel liner and internal Aluminum container. Never overfill with water and under no circumstances should the stainless steel liner float up, even when empty. Remove any excess water immediately.
- The temperature control should be set between 1 and 8 and always operate the kettle at the lowest setting to maintain correct serving temperature. Hold at high temperature when setting between 8 and 12.
- A neon light will glow when the unit is turned on. Turn the dial to 0 to switch off.
- Unplug from the wall socket to isolate kettle from the electrical supply.
- Always keep the removable hinged lid attached and in the closed position when not serving.
- Never move or carry the kettle when unit is switched on, or containing hot food.
- Spilled food should be removed immediately from all exterior surfaces. The stainless steel bain marie and lid are machine washable. The painted exterior and top collar should be wiped over with a damp soapy cloth.
- Ensure unit is unplugged when not in use, when filling and when being cleaned.
- The kettle must not be cleaned with a high pressure jet.
WARNING!
- NEVER IMMERSE KETTLE WATER AS DAMAGE TO THE UNIT WILL RESULT AND THE GUARANTEE WILL BE VOIDED.
- WARNING THIS APPLIANCE MUST BE EARTHED.
- DO NOT OPERATE KETTLE EMPTY.
CLEANING
- After each use, wash the inner and outer pots and the carrying ring, as food, spices and salt are aggressive and may damage the device.
- Set the temperature dial to “0” and remove the device’s plug from its socket. Wait for the device to cool.
- Remove the inner pot. Wash the lid, carrying ring and inner pot with a soft cloth and mild cleaning agent.
- Only empty the outer pot when the remaining water has cooled, otherwise there is a risk of burns!
- Wipe the outer pot on the inside and outside with a soft, moist cloth.
- Next, dry all washed parts thoroughly.
- If the device is to be washed, transported or remain unused for a longer period of time, empty it.
- Always use a soft cloth and never use coarse cleaning agents that could damage or scratch the surfaces of the device.
- After cleaning dry and polish the surface with dry cloth.
WASTE DISPOSAL
DISCARDING OLD DEVICES
At the end of its service life the discarded device has to be disposed in accordance with the national regulations. It is advisable to contact a company which is specialized in waste disposal, or just contact the local disposal service in your community.
WARNING!
To exclude any abuse and the dangers involved make the waste device unfit for use before disposal. For that purpose disconnect device from mains supply and remove mains connection cable from the device.
CAUTION!
For the disposal of the device please consider and act according to the national and local rules and regulations.
FAQs
Is it safe to use it to rewarm corn (corn in a cup)?
Yes. For the bottom, you’ll also require some water and corn, though.
What is the purpose of a SYBO SB-6000S soup kettle?
An essential cooking appliance found in almost all commercial kitchens is the soup kettle. The best way to store hot liquid foods like soup is in these containers, also known as soup warmers or soup urns. They normally have a capacity of six to twelve litres.
How does an electric soup kettle like the SYBO SB-6000S operate?
Similar to a bain marie, a soup kettle uses water to maintain the desired temperature while keeping food or drinks warm enough to serve.
What does a soup kettle, SYBO SB-6000S, look like?
It could be a tall cooking pot with a flat bottom and a lid. This kettle also resembled a cauldron because of its recessed cover, two to four little feet, and look. These hotpots typically have handles made of aluminium or cast iron on either side.
How is a SYBO SB-6000S soup kettle cleaned?
Disconnect the device’s plug from the outlet. Both the lid and the Bain Marie are dishwasher-safe materials. All you need to clean the equipment is a soft cloth, warm water with soap, and a warm sink. Clean and wipe the soup kettle after using it.
Soup kettles SYBO SB-6000S can they be heated from cold?
Once the soup pot has cooled to a safe level, it will automatically start reheating up.
Will a SYBO SB-6000S kettle heat soup?
Your favorite soup may be swiftly made in the comfort of your own home. Pour water into a cup or bowl containing instant soup powder after bringing a kettle of water to a boil. Your favorite soup is ready!
Can a SYBO SB-6000S soup pot be used to melt the wax?
Since I manufacture candles and melts using two distinct kinds of wax, I have two. Wax is added after the water has been added to the interior pot. To melt the wax, I set the temperature for the outer surface at 10 degrees, then lowered it to keep the temperature there. I next use a ladle to transfer the wax into a jug.
Do you fill a SYBO SB-6000S soup kettle with hot or cold water?
For maximum results, the water used for the stock or liquid addition should always be immediately boiled before being added to the soup maker. When the soup is finished, you might find that some vegetables, especially if they are large or rough, weren’t fully cooked if you used water straight from the tap.
How long does a SYBO SB-6000S soup kettle keep soup warm?
Food that hasn’t been eaten in two hours should either be quickly chilled to 8°C or lower, or it should be warmed to a scalding temperature and put back in hot holding. If it has been outside for longer than two hours, throw it away.
How does a SYBO SB-6000S kettle work?
Each Kettle contains a metal coil. The coil transfers electrical energy, which is converted to heat and used to warm the frigid water inside. The process seems to go somewhat like this: When the kettle is turned on, a substantial electric current flows through the coil, or “heating element.”
How do you switch off a SYBO SB-6000S kettle?
Through a conduit inside the kettle, which is often inside the handle, steam from the top of the boiling interior is delivered to the thermostat, which is typically located towards the base. As soon as boiling starts, the temperature swiftly increases from the surrounding ambient temperature to almost 100°C. As a result, the disc breaks, turning off the power.
What does the switch on the SYBO SB-6000S kettle do?
It does so even if it just detects a very slight electrical current leak. Kettles should be switched off whenever the water reaches a boil.
Will it dissolve soap that you pour?
Yes, one of our customers has also used our warmer in this manner.
