Everstart Maxx BC50BE 15 Amp Automotive Battery Charger User Guide

It depends on the condition of the battery. A fully discharged battery may take up to 8 hours to fully charge. A partially discharged battery may take less time to charge.

Once the charging cycle is complete, the unit will automatically switch to the maintenance mode. The LCD screen will display “Maintaining”. The unit will continue to maintain the battery at its current state of charge until you disconnect it from the clamps.

You can leave your battery connected indefinitely while in the maintenance mode. However, if you are planning on storing your vehicle for an extended period of time, we recommend that you disconnect your battery and store it in a cool dry place.

Yes, this charger will work with all 12 volt batteries including motorcycle and lawn mower batteries.

Yes, this charger is compatible with all types of lead-acid batteries including gel cell and AGM batteries. However, please note that this charger is not intended for use on Lithium-ion or LiFePO4 batteries.

No, this charger is not intended for use on deep cycle marine or trolling motor batteries. We recommend using our BC30D charger for these applications.

Automatic chargers are designed to maintain a constant voltage level in your battery once it has reached a full charge state. Smart chargers like this one are designed to sense when your battery has reached a full charge state and then switch into a maintenance mode where they will maintain that charge level until you disconnect the clamps from your battery. This means that if you leave your smart charger connected to your battery after it has reached full charge, it will continue to maintain that charge level until you disconnect it from your vehicle’s electrical system. This is why we recommend that you only connect your smart charger during times when you need to jump-start or recharge your vehicle’s battery and then disconnect it as soon as possible after those tasks have been completed. This will help prolong the life of your smart charger by reducing unnecessary strain on its internal components which could shorten its overall lifespan over time if left connected for extended periods of time without being used for its intended purpose (i.e., jump-starting or recharging).

24-hour
BATTERY RECONDITION
Press to engage a 24-hour battery reconditioning cycle. This cycle will subject your battery to intermittent high-frequency pulses in order to reduce the effects of corrosion and recondition your battery. This is NOT guaranteed to ensure charging.

about 10-24 hours
Charging a regular car battery with a typical charge amp of around 4-8 amperes will take about 10-24 hours to charge it fully. To boost your battery enough to be able to start the engine, it would take around 2-4 hours. The best way to maintain a long life for your car battery is by recharging it slowly.

Simply put, no car battery, whether healthy or dead, can charge itself. It always requires an external power source to get charged. Can Dead Batteries be Charged? Once a car battery is dead, the alternator will fail to recharge it completely.

This article helped you answer the question, “Can a car battery be too dead to jump start?” No. You can jump start it with ease regardless of a dead automobile battery. To jump start your vehicle, you need to find another vehicle that gets a fully charged battery and use the jumper cables for a two-car connection.

The CHARGE light may flash for the following reasons: The environmental temperature is too cold to charge the battery pack. The battery pack has not been used for a long time. There is a poor connection between the battery and charger.

VIDEO