MP1080SS Two Pack 7 Outlet Surge Protector with 2 USB Ports
Product Information
The CyberPower MP1080SS Surge Protector 2-pack is a 7-outlet
surge protector with 2 USB ports. It features an ON/OFF Reset
Control Switch and Circuit Breaker that controls power to all
outlets.
Product Usage Instructions
1. To turn on the surge protector, ensure that the ON/OFF switch
is in the ON position.
2. If the surge protector’s circuit breaker trips and turns off
the power, switch the ON/OFF switch to the RESET position after
removing any device that may be overloading the circuit.
3. If the grounded indicator does not light up when you plug in
the surge protector, try plugging it into a different grounded
three-prong AC outlet. If it still doesn’t light up, contact the
retailer for assistance. If the surge protector appears to be
working properly, your outlets may not be properly grounded and may
require repair by a professional electrician.
4. If the grounded indicator turns off after a period of use, it
means that the surge protection has been depleted. Replace the
surge protector with a new one.
5. If the protected indicator does not light up, it indicates
that the surge protector’s AC lines are no longer protected from
surges. The surge protector may have received a power surge or
spike beyond its limits, rendering it inactive. While it has
protected your connected equipment as designed, it will no longer
protect against future surges and spikes. It should be
replaced.
Where to Get More Information
Contact Cyber Power Systems (USA), Inc. for more
information:
– Address: 4241 12th Avenue East, Suite 400 Shakopee, MN
55379
– Phone: (877) 297-6937
– Email: [email protected]
Product Registration
Registering your product ensures coverage under the limited
lifetime warranty and allows you to receive product enhancements,
upgrades, and other announcements. To register your product, visit
the Product Registration Page at CyberPowerSystems.com/registration.
Contact Information
Cyber Power Systems (USA), Inc.
4241 12th Avenue East, Suite 400
Shakopee, MN 55379
Toll-free: 1-877-297-6937
Website: CyberPower.com
Conformance Approvals
This device complies with Part 15 of the FCC Rules. It does not
cause harmful interference and accepts any interference
received.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. It provides reasonable protection against harmful
interference in a residential installation. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment causes harmful interference to
radio or television, it may be resolved by repositioning or
relocating the device.
MP1080SS Two Pack: 7-Outlet
Surge Protector with 2 USB Ports
USER MANUAL
1
2
PROTECTED
GROUNDED
3
4
5
CONGRATULATIONS ON YOUR PURCHASE Thank you for selecting the CyberPower MP1080SS Surge Protector 2-pack. This manual explains the features and operation of the MP1080SS. Please take a few moments to read this manual. FEATURES 1. ON/OFF Reset Control Switch and Circuit Breaker Controls power to all outlets.
The switch is also a 15 A breaker. When an overload occurs, it will automatically switch off. To resume operation, ensure the overload condition is removed and reset the surge protector by switching the unit ON. 2. Protected LED Indicator Illuminated when the surge protection feature is working properly. 3. Grounded LED Indicator Illuminated when the ground protection feature is working properly. 4. Standard Grounded Outlets (6) and Transformer-spaced Grounded Outlet (1) 5. USB Charging Ports* (2) Connect and charge up to two (2) USB devices using the surge protected USB charging ports. *USB outlets cannot be used as a USB hub. This device does not transfer data.
SPECIFICATIONS · Model Number: MP1080SS · Outlets: Standard Grounded Outlets (6), Transformer-spaced Grounded Outlet
(1), USB Charging Ports (2) · Power Cord Length: 4 ft · Plug Type: Flat · Surge Protection: 1,200 Joules · Electrical Rating: 125 V/15 A/1875 W · USB Charging Rating: 5 V/2.4A total · UL Clamping Voltage: UL 1449 4th/600 V (L-N, L-G, N-G) · Maximum Peak Current: 60,000 A · 3 AC Lines Protected:
L-N: 30,000 A L-G: 15,000 A N-G: 15,000 A (The maximum surge possible on household wiring is 6,000 volts) · Response Time: Less than 1 nanosecond · Attenuation: Up to 32 dB · EMI/RFI Filtration: 150 kHz to 100 MHz · Circuit Breaker: Resettable 15 Amp
CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK – Use only in dry locations and only indoors. DO NOT plug into another relocatable power tap. DO NOT “daisy chain” surge protectors. DO NOT use with any aquarium equipment. DO NOT use if properly grounded outlets are not available. DO NOT install this device if there is less than 10 meters (30 feet) or more of wire between the electrical outlet and electrical service panel. DO NOT use for medical or life support equipment. This device features an internal protection that will disconnect the surge protective component at the end of its useful life, but it will maintain unprotected power to the load.
TROUBLESHOOTING If the ON/OFF is switched OFF, the 15 Amp circuit breaker may have tripped.
Examine your connected equipment and remove the device that is overloading
the circuit. Then, turn the ON/OFF switch back to RESET. If the grounded indicator does not light when you plug in the surge protec-
tor, move the surge protector to a different grounded three-prong AC outlet.
If it still does not light, return the product to the retailer for assistance. If
the surge protector appears to be working properly, your outlets may not be
properly grounded and need to be repaired by a professional electrician. If
the grounded indicator turns of after a period of use, the surge protection has
been depleted. Replace your surge protector. If the protected indicator does not light, the surge protector’s AC lines are no
longer protected from surge. The surge protector may have received a power
surge or spike beyond its
limits that overloaded the protection circuit-
ry and rendered it inactive. The surge protector has protected your connect-
ed equipment as designed, but it will not protect against future surges, and
spikes. It should be replaced.
TECHNICAL SUPPORT Please contact our Tech Support Department with installation, troubleshooting, or general product questions. · Phone: 1-877-297-6937 · Email: [email protected] · Hours of Operation: Monday Friday 7:00am 6:00pm CST
WHERE CAN I GET MORE INFORMATION?
Contact us at: Cyber Power Systems (USA), Inc. 4241 12th Avenue East, Suite 400 Shakopee, MN 55379; Call us at (877) 297-6937; Send us an email message at [email protected].
PRODUCT REGISTRATION
Prompt product registration assures coverage under the limited lifetime warranty,
and also allows the opportunity of
for product enhancements, upgrades,
and other announcements.
Registration is quick and easy. Go to the Product Registration Page at
CyberPowerSystems.com/registration.
CONTACT INFORMATION Cyber Power Systems (USA), Inc. 4241 12th Avenue East, Suite 400 Shakopee, MN 55379 Toll-free: 1-877-297-6937 | CyberPower.com
CONFORMANCE APPROVALS
This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment of and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or
not expressly approved by the party responsi-
ble for compliance could void the user’s authority to operate the equipment.
I WARNING: This product can expose you to chemicals including bisphenol A (BPA) and styrene (ABS), which is known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov.
Please join CyberPower in caring for the environment by recycling.
This device is manufactured using environmentally-safe procedures in compliance with the Restriction of Hazardous Substances (RoHS) directive.
UL Listed to U.S. and Canadian Safety Standards UL 1449. This product is listed to applicable U.S. and Canadian safety standards by Underwriters Laboratories Inc.
© 2020 Cyber Power Systems, Inc. www.cyberpower.com Copyright © 2020 Cyber Power Systems, Inc. All rights reserved.
TERMS AND CONDITIONS OF THE CYBERPOWER LIMITED WARRANTY Please read the following terms and conditions carefully before using CyberPower products (the “CPS Product”). By using the CPS product, you agree to be bound by the terms of this Limited Warranty (collectively the “Warranty”). IF YOU DO NOT AGREE TO THE WARRANTY TERMS AND CONDITIONS, YOU MUST RETURN THE PRODUCT BEFORE USING, AND OBTAIN A FULL REFUND. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM ONE PLACE TO ANOTHER. YOUR ACCEPTANCE OF THIS WARRANTY MAY MODIFY OR WAIVE ANY OTHER RIGHTS YOU HAVE.
Cyber Power Systems (USA), Inc. (“CyberPower”) provides this Limited Warranty.
WARRANTY COVERAGE
The warranty covers only the original purchaser and ends when the original pur-
chaser no longer owns the CPS product. The warranty covers defects in materials
and workmanship in the CPS Product under normal use and to perform as designed,
after correct installation and under the operating conditions described in the User’s
Manual. Proof of purchase (receipt and / or invoice) is required for warranty cover-
age.
The warranty period varies according to the type of product purchased. Please check
our website at http://www.cyberpower.com/lac for additional information on the
applicable product.
For warranty claims:
1. Telephone:
USA
(877) 297-6937
Latin America/Caribbean (800) 279-6580
México
(0155) 4622-8654
Or write to us at: Cyber Power Systems (USA), Inc. 4241 12th Ave. E., Suite 400 Shakopee, MN 55379
In Mexico: Cyber Power Systems S.A. de C.V. Aniceto Ortega 634 Col. Del Valle Del. Benito Juárez, C.P. 03100 Ciudad de México, México [email protected]
2. To replace the CPS Product, CyberPower will replace, at no additional cost, any CPS Product or Equipment at its sole discretion; Through the network of distributors, wholesalers and representatives of CyberPower; And / or directly from the factory to the end user. CyberPower, in its sole discretion, may replace the defective or damaged CPS Product with a new or reconditioned product, without prior notice.
3. CyberPower covers shipping costs when CPS products are shipped to the end
user. In the case of Latin America and the Caribbean, CyberPower may choose
to ship the replacement unit to the export agent or end-user load agent in
the United States at no additional cost. The record importer (customer) is re-
sponsible for complying with all applicable US Export Laws and requirements,
as well as your
country import process. CyberPower may require the
customer to return the warranty unit to a local dealer, or back to CyberPower,
or to destroy and / or dispose of a damaged unit locally. The customer covers
shipping costs only if necessary and is required to return the CPS product to
CyberPower.
4. In the event that CyberPower determines that a warranty unit can not be re-
placed by an equal or equivalent product, CyberPower may reimburse the end
user for the purchase price of the product, including taxes, up to a maximum
of the suggested MSRP, plus applicable taxes. The refund can be processed
in US dollars converted into local currency at the time of purchase. The end
user must provide valid receipts and purchase documentation for an approved
channel to validate the claim.
5. MEXICO – Cyber Power Systems (USA), Inc., under the CyberPower brand, markets products that are designed and marketed for use primarily in the United States. CyberPower may provide a Connected Equipment Guarantee (CEG) for certain products. THE CONNECTED EQUIPMENT GUARANTEE IS ONLY VALID FOR PRODUCTS INSTALLED IN THE UNITED STATES, AND IS NOT VALID IN OTHER COUNTRIES, UNLESS SPECIFIED. Any reference to Connected Equipment Guarantee in documentation, packaging, or warranty is only valid for equipment installed in the United States. Products marketed or otherwise installed in Mexico are only covered by a manufacturer’s Guarantee Policy and are not covered by a connected equipment warranty.
Cyber Power Systems S.A. Of C.V. (CyberPower): Provides a limited warranty, depending on the product model, from the date of purchase in all its parts and labor, against any manufacturing defect,
under the following CONDITIONS: · To make this guarantee effective, you must present this policy stamped by the
establishment that sold it and / or the original invoice, without violating the seal of warranty, together with the product at the place of purchase or at the address:
Cyber Power Systems S.A. de C.V. Aniceto Ortega 634 Col. Del Valle Del. Benito Juárez, C.P. 03100 Ciudad de México, México Tel: (0155) 4622-8654
· Return transportation costs, once repaired and resulting from their compliance, will be covered by CyberPower.
· The repair time, in no case, will be more than 30 days from the date the equipment is received at the Service Center.
· At the end of this warranty, spare parts, parts and accessories for this product can be purchased directly from CyberPower.
THIS WARRANTY SHALL NOT BE
EFFECTIVE IN THE FOLLOWING CASES:
· If the equipment has been used in conditions other than normal.
· If the equipment has not been operated following the instructions in the in-
struction manual.
· If the equipment has been
opened or repaired by unauthorized per-
sonnel.
CyberPower product registration facilitates the management of warranty claims and
also allows
of product enhancements, updates and other announce-
ments. We suggest you create a user account on the CyberPower page according to
the instructions given here:
Please contact our technical support department for installation assistance, technical
support and general product questions.
Telephone: USA Latin America/Caribbean México
(877) 297-6937 (800) 279-6580 (0155) 4622-8654
Email:
Latin America/Caribbean
México
This Guarantee does not cover any:
A. Software that has been corrupted or needs to be replaced due to product
failure or any data lost as a result of failure, or restoring data or records, or
reinstalling software;
B. Use, misuse,
performance or storage outside the environmental
limits of the CPS product, or equipment connected to it, nor for damage while
in transit or in storage. Products that should not be used with the CPS Product,
such as laser printers, aquarium appliances, medical or life support devices,
etc.;
C. Defects or damages due to: accidents,
lightning, vandalism, acts
of God, neglect, abuse or misuse among others: in shipping, storage, installa-
tion, application, and operation or maintenance not in With industry-standard
recommendations and practices.
D. System batteries and all other peripheral products and accessories not sup-
plied by CyberPower (including components and software) or the installation,
operation, maintenance or service of such accessories;
E. And, the reimbursement of labor, pressure washing, access, removal, installa-
tion, employee expenses, or any other expenses you may incur in connection
with the repair or replacement of the product, the accessories supplied with
the product: cables, user manual, CD, etc.;
F. Any product that the serial number printed and attached to the product has
been: removed,
changed, altered, or manipulated.
The only and exclusive remedies of the client are those provided by this Guarantee. TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY AND THE ESTABLISHED REMEDIES ARE EXCLUSIVE AND REPLACE ALL OTHER WARRANTIES, REMEDIES, AND CONDITIONS; WHETHER ORAL, WRITTEN, STATUTORY, EXPRESS OR IMPLIED. CYBERPOWER DISCLAIMS ALL STATUTORY AND IMPLIED WARRANTIES; INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS, TO THE EXTENT PERMITTED BY LAW. CYBERPOWER LIMITS THE DURATION AND THE RESOURCES OF SUCH WARRANTIES TO THE DURATION OF THIS LIMITED WARRANTY AND, AT CYBERPOWER’S OPTION, THE REPAIR OR REPLACEMENT SERVICES DESCRIBED ABOVE. SOME STATES (COUNTRIES AND PROVINCES) DO NOT ALLOW LIMITATIONS AS TO THE TIME WHICH CAN LAST AN IMPLIED WARRANTY (OR CON-
DITION), SO THE ABOVE LIMITED LIMITATION MAY NOT APPLY TO YOU.
Regardless of the basis on which you are entitled to claim damages against CyberPower; IN NO EVENT SHALL CYBERPOWER BE LIABLE TO YOU FOR INJURY OR DAMAGE CAUSED TO BUSINESS, PROFITABILITY, RESULTS, REVENUE, TRADEMARK, GOOD FAITH, OR FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF YOU HAVE BEEN ADVISED OF THE RISK AND POSSIBILITY OF SUCH DAMAGES.
In addition, the product and the equipment connected to it must have been used properly in a suitable, appropriate environment and in accordance with any license, the instructions in the brochure or warnings provided with the product, and the equipment connected to it. Without limiting the foregoing:
1. This Warranty is not valid unless the CPS Product and connected equipment
are connected to properly grounded outlets (including compliance with the
electrical and safety codes of the most recent electrical code) without the use
of adapters or other connectors of any kind.
2. The CPS product must be connected directly to the power source and equip-
ment directly connected to the CPS product.
3. The product must be directly connected to the CPS Product; Must not be
connected “in series” with extension cables, another product or device similar
to the CPS product, surge suppressor or power supply: this type of installation
voids the warranty.
4. The CPS product and the connected equipment must have been used correctly
in a suitable environment and in accordance with any applicable license, in-
struction manual and manufacturer’s warnings.
5. The CPS Product must have been used at all times within the limitations in the
voltage capacity of the CPS Product.
6. The product is not for use in high risk activities or connected to aquariums.
The product is not intended for use in hazardous environments requiring
fail-safe operation, or for any circumstance where failure of the product could
lead directly to death, personal injury, or serious physical or material damage
affecting the operation or The safety of any medical or life support device (col-
lectively, “High Risk Activities”). CyberPower expressly disclaims any express
or implied warranty of
for high risk or aquarium activities. Such use is
improper and voids this warranty.
Cyber Power Systems (USA), Inc. 4241 12th Ave E., Suite 400 Shakopee, MN 55379
Telephone: USA Latin America/Caribbean México
(877) 297-6937 (800) 279-6580 (0155) 4622-8654
Email:
Latin America/Caribbean
México
Sales:
Please join CyberPower to take care of the environment by recycling this manual. This device is manufactured using ecologically safe procedures in accordance with the Restriction of Hazardous Substances directive. (RoHS).
K01-0000862-00
CyberPower | UPS Systems & PDUs | Professional Power Solutions
Registration | CyberPower
CyberPower | UPS Systems & PDUs | Professional Power Solutions
P65Warnings.ca.gov
