Kygo E7/900 Bluetooth Earbuds With Charging Case User Guide

Kygo E7/900 Bluetooth Earbuds with Charging Case

Kygo Life unites my love of music with modern Scandinavian design. The aim is to develop top–quality audio equipment that sounds amazing and looks great. Future classics capture the euphoric feeling of my music. Like my approach to everything, Kygo Life is driven to continually improve. So, as each product evolves it embraces the latest technology and focuses on perfecting the details until I’m absolutely happy the end result is the best it can be. I hope that by creating new and inspiring audio experiences, you’ll enjoy listening to your favorite tunes even more.

Getting Started

Congratulations on your new Kygo E7/900 earphones! Before using this product, you should read this manual and familiarize yourself with the Bluetooth functions of your mobile phone or other devices.

Introduction

The Kygo E7/900 earphones allow you to listen to your music wirelessly from your mobile phone, tablet, or other Bluetooth-enabled devices. It delivers powerful and clear sound. The built-in microphone also allows you to answer calls from your phone.

Precautions

Please refer to this Users’ Manual before using it to ensure proper use. The contents stated herein may be modified from time to time for better service as the product properties and functions are subject to change without prior notice. For the sound performances of the product, never use it in too cold, too hot, too dusty, or humid places, especially:

1. Near the heater or high-temperature services or solarization.
2. In hazardous locations or in places apt to fall.
3. Never disassemble the combination audio.

Do not use any diluents or volatile liquids to clean your headset and make sure to use only a charger from the qualified manufacturer. In order to avoid electric shocks and product damage, do not attempt to dismantle, repair or modify the product. This product or its battery cannot be disposed of with household waste, therefore it must be returned to a collection point to be recycled. Please check with your local authorities for details.

Features

1. Bluetooth 5.0
2. Sound quality with AAC codec
3. Waterproof (IPX 7)
4. Microphone
5. Accessories included: Freebit sport wings, Comply™ Foam ear tips, and silicon tips

Basic Buttons Operation

Wearing guide

• STEP 1
  Remove the headset from the charging case and choose between the included silicone or Comply Foam ear tips and the Freebit sport wings included in the package. We suggest you test the different sizes to find the one that fits your ear best.
• STEP 2
  Insert the headset in your ear and slightly rotate the headset until it is firm.
  
• STEP 3
  Make sure the headset is placed properly into the ear before use.
  

General function

Switching on / off on

METHOD 1

• In OFF MODE, press and hold headset(R) and headset(L) MFB for 2 seconds to turn on.
• In ON MODE, press and hold the headset(R) or headset(L) MFB for 5 seconds to turn off.

METHOD 2
Pick up the headsets from the charging base to turn them on automatically. Put them back to power off and charge the headset

True Wireless Pairing

Method 1
Pick up the two headsets from the charging base to power on and wait for 10 seconds. The two headsets will now enter auto-pairing mode and connect with each other after a few seconds. The headset (R) will blink red and blue and prompt “pairing”. Then open the device’s Bluetooth configurations and select “KYGO E7/900 – R”.

Method 2
In the OFF state, press both MFB buttons for 2 seconds to power on and wait for 10 seconds. The two headsets will now enter auto-pairing mode and connect with each other after a few seconds. The headset (R) will blink red and blue and prompt “pairing”. Then open the device’s Bluetooth configurations and select “KYGO E7/900 – R”.

After the headset is successfully paired through method 1 or 2, the right headset prompts “pairing successful – device connected”.

Reconnect

Method 1 (if the headset was placed in the case without being turned off):
Pick up the headsets from the charging base to power on -> After a few seconds the two headsets will automatically connect with each other -> the headset will pair automatically with the most recently paired device within Bluetooth reach.

Method 2 (if the headset was turned off with the MFB before being put in the case):
Press and hold the MFB buttons for 2 seconds to power on -> After a few seconds the two headsets will automatically connect with each other -> the headset will pair automatically with the most recently paired device within Bluetooth reach.

Note: When reconnecting the headset it will prompt “connected”, “left channel” and “right channel”. When it successfully connects to a device, the right headset prompts “device connected”.

Adjusting the Volume
In call mode or music playing mode, short press MFB of the headset(R) to increase the volume; short press MFB of the headset(L ) to reduce the volume.

Forward/Backward
In call mode or music playing mode, long press MFB of the headset(R) for 2 seconds to the next song; long press MFB of the headset(L)for 2 seconds to the last song.

Delete Pairing Records on the Headset
ON/OFF MODE state, press the MFB button on both headset (L) and headset (R) for 10 seconds (OFF MODE->ON MODE(2 seconds)->Delete pairing records (10 seconds), until hearing the Beep voice 3 times, and the red/blue light flashes twice at the same time.

Answering /Ending a Call Headset (R)
When calling income, short press MFB of a headset (R) or headset (L) to answer calls; in a call mode, long press MFB of the headset (R) or headset (L) for 2 seconds to end a call.

Rejecting a call
Press and hold the MFB of the headset(R) or headset (L) for 2 seconds to reject the call, the speaker prompts “beep” twice. Please note that this function only supports mobile phones with a voice dialing function.

Music Pause/Playing
On standby mode, shortly press headset (R) or headset (L) to play music. On music playing state, double click headset (R) to PAUSE music. But the headset (L) cannot pause independently.

Voice Dialing
On standby mode or music playing state, double-click the secondary ear (L) function key, which can be heard as “Du”. Please note that this function only supports mobile phones with a voice dialing function.

Two-call
(Only support the mobile phone which has the function of handling two phones.) When you are answering a call, there is another call coming :

1. Long press and hold MFB of a headset(R) for 2 seconds to end the current call and answer an incoming call.
2. Short press MFB of a headset(R) to hold the current call and answer incoming calls.
3. After the second implementation, short press MFB of a headset(R) to switch between two calls.
4. After the second implementation, long press MFB of a headset(R) for 2 seconds to end the current call, and long press MFB of the headset(R) for 2 seconds to end the other call.

Note: All the above operations have to respect the precondition that the Phone supported Bluetooth hands-free profile V1.5 and Phones are running under call holding function (Network services) from telecom.

Battery charging

Charging Ways of Headset
The indicator light of the headset is red when being charged, and will turn off automatically after being fully charged. Put the headset (L) (R) to the corresponding position at the bottom of the charging base. The earbuds charge automatically when placed in the base.

Charging Ways of Charging Base
Use the USB-C charging cable to charge. The indicator lights of the charging base flash when being charged, and four lights are on after being fully charged. Use the USB- C cable to connect with the computer.

• Note 1: Check whether the charging device is suited for the headset or not.
• Note 2: Use only the supplied USB-C charging cable to charge the headset. The use of other equipment may harm the product and cause danger.
• Note 3: Do not attempt to force open the built-in battery as this could damage the headset
• Note 4: A fully charged headset will lose its power automatically if left unused. It is recommended to charge the headset every three months.
• Note 5: Do not leave the headset in a too hot or too cold condition. This may affect the headset’s operations although it is fully charged
• Note 6: Do not dispose of the headset in fire or water.

Re-connecting to Bluetooth devices

Every time the headphone is switched on, they will connect to the nearest and the last connected device automatically. When the headphone is in standby mode and doesn’t connect to any device, short press the MFB button and it will connect to the last connected device automatically.

Note: Headphones can be paired with two devices simultaneously.

Troubleshooting

Water resistance

The Kygo E7/900 is waterproof under the classification IPX7. This means that the earbuds can tolerate 30 minutes submerged in water up to 1 m (3 feet). The charging case is not waterproof and should not be in contact with water. Kygo E7/900 I was tested under controlled laboratory conditions with a rating of IPX7 under IEC standard 60529. Waterproofing is not a permanent condition and resistance might decrease as a result of normal wear. Do not attempt to charge a wet headset. Liquid damage is not covered under warranty.

Warning

• Only use the charger approved by the manufacturer to charge the earphone.
• Charge the headset if it has not been used for more than 3 months.
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.
• Do not dispose of the battery in or close to open fire as it may cause an explosion.

Specifications

• Bluetooth Version: Bluetooth 5.0
• Profiles Supported: HSP, HFP, A2DP, AVRCP SBC, AAC® CODEC
• Operation Range: Up to 10 meters
• Music Playing Time: Up to 3,5 hours
• Charging Base Supply Power for Headset Music, Play Time: Up to 10 hours
• Frequency response (+-3dB): 20Hz-20kHz
• Impedance: 16Ω±15%
• Driver sensitivity: 100db/1kHz
• Battery: 45mAH Li-polymer Battery
• Charging Time of Headset: About 2 hours
• Earphone dimensions: L19.5×W19.5×H26
• Total Weight: 60g

Kit contents

• True Wireless earphones Kygo E7/900 3 pairs of silicon tips
• 3 pairs of Freebit sports wings
• 1 pair of silicon ring
• 1 pair of Comply foam ear tips Charging case
• USB- C charging cable
• User manual

FAQ’s