If your vacuum is not suctioning like it used to it is likely due to an obstruction in the air pathway
Follow these steps to resolve:
- Test for suction at end of the Extension Wand (dirt tank must be attached to machine)
- Push the release button and lift the Wand up
- Turn on, hold hand over end of Extension Wand
- Is there suction at the end of the Extension Wand?
- Yes > Go to Lower Hose/Foot
- No > Disconnect the Hose from the Extension Wand
- Turn on, hold hand over end of Hose
- Is there suction at the end of the Hose?
- Yes > This would indicate there is a clog in the Extension Wand
- Push broomstick through Extension Wand to clear debris
- Yes > This would indicate there is a clog in the Extension Wand
- No > Disconnect the Hose from the back of machine
- Turn Hose cuff to left to remove
- Inspect the hose, is it cracked or damaged?
- Yes > Replace the hose > Go to Parts & Supplies
- No > Push a broomstick through hose to clear clogs & debris
- Reattach hose to the back of the machine
- Turn on & check for suction at the end of the hose
- Is there suction?
- Yes > If you’re still having suction issues at the foot > Go Lower Hose/Foot
- No > Go to Filters/Tank
- Is there suction?
