WD-M01-CH-1 Wireless Charger
Product Information
The Wireless Charger is a device designed to wirelessly charge
compatible electronic devices. It operates using a wireless
magnetic charging technology.
- Model No.: WD-M01-CH-1
Product Usage Instructions
Please follow the instructions below to ensure safe and proper
usage of the Wireless Charger:
Safety and Handling
WARNING: Failure to follow these safety
instructions could result in fire, electric shock, injury, or
damage to the Wireless Magnet Charger or other property. Read all
the safety information below before using the Wireless Magnet
Charger.
- Liquid Exposure: Keep the Wireless Magnet
Charger away from sources of liquid, such as drinks, oils, lotions,
sinks, bathtubs, and shower stalls. Protect the Wireless Magnet
Charger from dampness, humidity, or wet weather, such as rain,
snow, and fog.
Regulatory Compliance
This device contains license-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science and Economic Development
Canada’s license-exempt RSS(s). Operation is subject to the
following two conditions:
- This device may not cause interference.
- This device must accept any interference, including
interference that may cause undesired operation.
Cet équipement est conforme aux limites d’exposition aux
rayonnements FCC établies pour un environnement non contrôlé. Cet
équipement doit être installé et utilisé avec une distance minimale
de 20 cm entre le radiateur et votre corps. Ce transmetteur ne doit
pas être placé ou utilisé en conjonction avec une autre antenne ou
un autre émetteur.
Usage Guidelines
- Metallic Cases and Objects: When using the
Wireless Magnet Charger, remove metallic cases and avoid placing
metallic foreign objects on it (e.g., keys, coins, batteries, or
jewelry), as they may interfere with charging or become warm enough
to cause discomfort or injury if your skin comes into contact with
them. - RFID Tags: Do not place any item with an RFID
tag (e.g., a contactless credit card, passport, or access card) on
the Wireless Magnet Charger, as the RFID tag could be damaged.
Wireless Charger
Model No.: WD-M01-CH-1
1
Safety and Handing WARNING:Failure to follow these safety instructions could result in fire, electric shock,injury,or damage to the Wireless Magnet Charger or other property. Read all the safety information below before using the Wireless Magnet Charger. Liquid Exposure Keep the Wireless Magnet Charger away from sources of liquid,such as drinks,oils, lotions,sinks,bathtubs,and shower stalls.Protect the Wireless Magnet Charger from dampness,humidty,or wet weather,such as rain,snow,and fog.
Power Provide power to the Wireless Magnet Charger using PD power adapters or third-party power adapters that are compliant with applicable country regulations and international and regional safety standards,including the Standard for safety of information Technology Equipment(IEC 60950-1) and the Standard for Safety of Audio/Video,information and Communication Technology Equipment(IEC 62368-1). Other adapters may not meet applicable safety standards,and using them could pose a risk of death or injury. Reacommended Power Adapter Specifications: * Frequency: 50 to 60 HZ,single phase * Line Voltage: 100 to 240 VAC * Output Voltage/Current: 5Vdc/0.5A * Minimum Power Output: 2.5W * Output Port: USB-C
3
adapter,or devices on the Wireless Magnet Charger,or place them under a blanket, pillow,or your body,when it’s connected to a power source.It’s important to keep the Wireless Magnet Charger and the power adapter in a well-ventilated area when in use or charging.Take special care if you have a physical condition that affects your ability to detect heat against the body. Repairing Don’t attempt to repair the Wireless Magnet Charger yourself.Disassembling the Wireless Magnet Charger may damage it or cause injury to you.if the Wireless Magnet Charger is damaged or malfunctions,discontinue use and contact Kinghome Electronics Technology(Chongqing) Co., Ltd. Exposure to Radio Frequency Energy The radiated output power of the Wireless Magnet Charger meets applicable radio frequency exposure limits.The Wireless Magnet Charger should be operated with a minimum separation distance of 20cm(8 inches)between the Wireless Magnet Charger,or any devices on the Wireless Magnet Charger,and a person’s body. Medical Device interference The Wireless Magnet Charger contains magnets and radios that emit electromagnetic fieds.These electromagnetic fields may interfere with medical devices,such as pacemakers and defibrillators.Consult your physician and medical device manufacturer for information specific to your medical device and whether you need to maintain s safe distance of separation between your medical device and the Wireless Magnet Charger .if you suspect the Wireless Magnet Charger is interfering with your medical devive,stop using the Wireless Magnet Charger. System Specifications
Input Voltage/Current:5Vdc 0.5A min Operating Temperature:0-35 (32-95°F)
5
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1This device may not cause interference. 2This device must accept any interference, including interference that may
cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1L’appareil ne doit pas produire de brouillage; 2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2
Don’t use the Wireless Magnet Charger or the USB-C Power adapter in wet locations,such as near a sink,bathtub,or shower stall,and don’t connect or disconnect them with wet hands.Disconnect the Wireless Magnet Charger,its cable,and the power adapter if any of the following conditions exists:You want to clean the Wireless Magnet Charger or the power adapter;the power cord or plug becomes frayed or otherwise damaged;the Wireless Magnet Charger,its cable ,or the power adapter is exposed to rain,excessive moisture,or liquid; or the Wireless Magnet Charger,its cable,or the power adapter has been dropped, damaged,or you suspect that service or repair is required.When you use the USB-C power adapter,make sure the cable is fully inserted into the power adapter before you plug the adapter into a power outlet.
When using the Wireless Magnet Charger,remove metallic cases and avoid placing metallic foreign objects on it(for example,keys,coins,batteries,or jewelry),as they may interfere with charging or become warm enough to cause discomfort or injury if your skin comes into contact with them.Don’t place any item with an RFID tag(for example, a contactless credit card,passport,or access card)on the Wireless Magnet Charger,because the RFID tag could be damaged.
Prolonged Heat Exposure The Wireless Magnet Charger and its cable comply with the applicable surface temperature standards and limits defined by the international Standard for safety of information Technology Equipment(IEC 60950-1)and the Standard for Safety of Audio/Video,Information and Communication Technology Equipment(IEC 62368-1).However,even within these limits,sustained contact with warm surfaces for long periods of time may cause discomfort or injury.Use common sense to avoid situations where your skin is in contact with the Wireless Magnet Charger, the power adapter,or devices on the Wireless Magnet Charger when it’s operating or connected to a power source for long periods of time. For example,don’t sleep on the Wireless Magnet Charger,the power
4
FCC Requirement changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1this device may not cause harmful interference, and 2this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
