pop SCULPT Hair Clippers User Guide

pop SCULPT Hair Clippers

Contents hide

1 INCLUDES:

2 How to use

3 Cleaning & Maintenance

8 Documents / Resources

8.1 References

9 Related Posts

INCLUDES:

Clippers
Charging cable
4x length combs

How to use

Push up the power switch to power on.
Push the clipper in straight lines t o avoid over-trimming. Move from the outside of the hairline inward.
Push down the power switch to power off.
Note: For the best performance, we recommend cleaning your hair clipper frequently. Cleaning instructions are included in this booklet.

Cleaning & Maintenance

Power off y our hair clipper
Hold the blade part of the knife head and pull it outward in the direction of the arrow shown in the figure, removing the knife head. (a) Note: adjustable knife heads should be put to the highest value before disassembling it.
Remove hair from the head of the machine and cutter head (b), then flush the cutter head assembly directly with clean water (c).
Dry the blade assembly with a cloth. Apply a f ew drops of oil t o the blade. (d)
Reassemble your hair clipper. (e)

Attention

Please abide by the safety instructions manual. Violations may lead to short circuit, fire, electric shock and other serious personal injury or even death.
When charging is completed, hold the charger and pull it out of socket. Do not to pull the charging cable out. Do not use wet hands to plug and pull adapter. Avoid touching liquid while using device.
Provided USB cable or power adapter must be used for charging. When cable or plug of power adapter is damaged or the adapter plug can’t be fully attached to socket, do not use USB cable or adapter. Always replace the original type of USB cable or power adapter, so as to avoid danger.
Do not place heavy objects on the charging cable or use other objects to jam the charging cable.
Clean the dust from the socket regularly.
Keep the hair clipper dry.
To avoid discoloration, do not use diluent, Benzene or alcohol on clipper.
This product is intended to cut human hair and cannot be used for any other purpose.
Check whether the blade is damaged or deformed before use.
Do not disassemble or refit the hair clipper. If it does not work properly, submit the clipper to a dealer authorized maintenance center for inspection or repair.
Persons with physical disabilities, mental disorders and lack of relevant experience and knowledge, including children, must be under the supervision and guidance of guardians in order to avoid danger.
In order to ensure the normal operation of the clipper, please charge it in the environment of 5-35 degrees Celsius. Do not expose the hair clipper to direct sunlight or heat of any source.
During normal use, the hair clipper may become warm, this is normal and should not cause concern.
Power adapter contains a transformer. Do not replace adapter plug by yourself.
Before connecting to the hair clipper, make sure that the voltage marked on the hair clipper is line with the local power supply voltage.

Discard

When the service life of your clipper is over, do not throw it away with general waste. Consult your area’s guidelines on how to recycle the product.

WARNING:
1) Battery must be removed before discarding the clipper
2) Clipper must be powered off before removing the battery.
3) Battery should be safely disposed.

Disposal of Waste Batteries
Built-in rechargeable batteries contain potentially polluting environmental substances. Before discarding your hair clipper, you are encouraged to consult the distributor or our company to make maintenance points in advance, so as to extend the service life of the hair clipper as long as possible. When you decide to discard the hair clipper, the batteries must be safely removed and put into designated recycling sites. Do not throw them away with your regular garbage.

Warranty

POP SONIC warrants the clipper for a period of 1 year after the original date of purchase, against defects due to faulty workmanship or materials. For warranty claims, you must register your device and log in to your account at www.shoppopsonic.com, then select the option to make a warranty claim. Our customer service department will then contact you to initiate the warranty procedure.

This warranty covers working parts. It does not cover damage due to normal usage or accidents such as dropping the device.

Other exclusions include misuse or neglect to the device. This warranty is void if any other charging cables besides the one included is used with your device.

For any warranty claims, proof of purchase must be provided. For this reason, please keep your receipt for the duration of the warranty period. Shipping costs are non-refundable.

Support

For questions about your product please call Pop Sonic customer services at (800) 772-9147 or email [email protected]

Made By Pop Sonic, LLC
Minneapolis, MN 55344 , USA
MADE IN CHINA