SSPOR-001-NG-LP Portable Barbecue Bench Stand
Product Information: Portable Barbecue Bench Stand
The Portable Barbecue Bench Stand is an accessory designed for
use with CookoutTM barbecues. It is compatible with the following
models:
- Classic Gas Portable (SSPOR-001-NG/LP)
- Deluxe Gas Portable (SSPOR-003-NG/LP)
- Royale Gas Portable (SSPOR-004-NG/LP)
- Classic Electric Portable (SSPOR-001-E)
- Deluxe Electric Portable (SSPOR-003-E)
This bench stand is manufactured by Southern Stainless Pty Ltd,
an Australian company located on the Gold Coast.
Product Usage Instructions
Before using your CookoutTM barbecue accessory, it is important
to read and understand this instruction manual. Follow the steps
below to fit your bench stand into your portable barbecue:
- Place the barbecue on a soft surface, such as a blanket or soft
cloth, to avoid scratching or damaging the surface. - Refer to the pictures provided in the manual for visual
guidance. - Position the bench stand according to the instructions shown in
Figure 1 and Figure 1a. - Align the hooks on the bench stand with the corresponding slots
or holes on the barbecue. - Gently push down on the bench stand to secure it in place.
- Ensure that the bench stand is stable and properly attached
before using the barbecue.
If you have any questions or need further assistance, please
contact Southern Stainless Pty Ltd using the contact information
provided in the manual.
PORTABLE BARBECUE BENCH
STAND
FOR USE WITH CLASSIC/DELUXE/ROYALE PORTABLE
BARBECUE
Instruction Manual
Designed for use with the following CookoutTM barbecues:
Classic Gas Portable
SSPOR-001-NG/LP
Deluxe Gas Portable
SSPOR-003-NG/LP
Royale Gas Portable
SSPOR-004-NG/LP
Classic Electric Portable
SSPOR-001-E
Deluxe Electric Portable
SSPOR-003-E
IT IS IMPORTANT THAT YOU READ THIS DOCUMENT BEFORE ATTEMPTING TO USE YOUR COOKOUTTM BARBECUE ACCESSORY
OPS-FRM-05.2
Portable Barbecue Bench Stand Instruction Manual
2023-06-01
READ THESE INSTRUCTIONS BEFORE USE
This manual is an integral part of your CookoutTM barbecue accessory; it must be read carefully and understood before the accessory is fitted to the appliance.
Instructions for fitting your bench stand into your portable barbecue:
1. Refer to the pictures on the opposite page. 2. Place the barbecue on a soft surface, such as a blanket or soft cloth, to avoid
scratching. Assemble the stand parts (Classic Portable barbecue, refer to Figure 1, and Deluxe/Royale Portable barbecue, refer to Figure 1 and 1a). 3. Tilt the barbecue on to the back angled surface of the lid so you can see the two square hollow leg inserts on either side of the barbecue ( Figure 2) 4. Slide the short end of one leg into the leg insert on a 45-degree angle. 5. For the Classic Portable barbecue, slide the other leg into the opposite side of the barbecue so both legs cross each other at the back of the appliance, fitting the legs together using the interlocking slots (Figure 2). For the Deluxe/Royale Portable barbecue, slide the other leg into the opposite side of the barbecue and fit the additional piece of the stand into the matching slots on legs 1 and 2 (Figure 2a). 6. Ensure that the legs (and bracing for the Deluxe/Royale Portable barbecue) are securely fitted together to complete assembly of the stand. 7. Return the barbecue to the upright position and place securely on a bench or table (Figure 3). 8. If using with a Classic, Deluxe or Royale Gas Portable barbecue, the stand must be secured to the bench via the holes in the legs (Figure 4 and Figure 4a Deluxe/Royale Gas Portable barbecue).
2
Southern Stainless Pty Ltd – Artisans in Metal – Uncontrolled when printed
OPS-FRM-05.2
Portable Barbecue Bench Stand Instruction Manual
2023-06-01
Figure 1
Figure 1a
Figure 2
Figure 2a
Figure 3
Figure 4
Figure 4a
3
Southern Stainless Pty Ltd – Artisans in Metal – Uncontrolled when printed
OPS-FRM-05.2
Portable Barbecue Bench Stand Instruction Manual
CONTACT US
2023-06-01
This appliance is proudly manufactured in Australia on the Gold Coast by Southern Stainless Pty Ltd.
4
Southern Stainless Pty Ltd – Artisans in Metal – Uncontrolled when printed
