POWERMATIC Drill Press PM2820EVS
WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.p65warnings.ca.gov.
WARNING: Drilling, sawing, sanding or machining wood products generates wood dust and other substances known to the State of California to cause cancer. Avoid inhaling dust generated from wood products or use a dust mask or other safeguards for personal protection. Wood products emit chemicals known to the State of California to cause birth defects or other reproductive harm. For more information go to http://www.p65warnings.ca.gov/wood.
Assembly to the Drill Press
See drawing at right to assist with assembly to the PM2820EVS drill press. The Down Draft Table surface should be leveled with surface of drill press table; use a level across the tables and turn the set screws as needed beneath drill press table to achieve this. Tighten screws (#6) to secure setting. Dust hose not provided. Secure end of hose to dust chute (#3) with a hose clamp, and opposite end of hose to an appropriate dust collection system.
Parts List
To order parts or reach our service department, call 1-800-274-6848 Monday through Friday, 8:00 a.m. to 5:00 p.m. CST. Having the Model Number and Serial Number of your product available when you call will allow us to serve you quickly and accurately. Non-proprietary parts, such as fasteners, can be found at local hardware stores, or may be ordered from Powermatic.
Powermatic
427 New Sanford Road
LaVergne, Tennessee 37086
Ph.: 800-274-6848
www.powermatic.com
Document No. M-1792825
Edition 1 07/2020
Copyright © 2020 Powermatic, a division of JPW Industries
Documents / Resources
 | POWERMATIC Drill Press PM2820EVS [pdf] Instruction Manual POWERMATIC, Drill Press, PM2820EVS |
www.ca.gov | California State Portal
p65warnings
powermatic.com