Delonghi Heater Manual - Manualsee

Delonghi Heater Manual

Delonghi-LOGO

Delonghi Heater

Delonghi-Heater-PRODUCT

Delonghi Heater

OVERVIEW

Delonghi Heater
MODEL:
TRD4 0820T – TRD4 0615T – TRD4 1025T

Description of Appliance

Parts

INSTRUCTIONS FOR USE

Read these instructions carefully before using the appliance.
Failure to comply with these instructions can lead to injury to persons and damage to the machine.
The manufacturer is not liable for damage deriving from the failure to comply with the user instructions.

Important warnings

Symbols used in these instructions

Important warnings are identified by the symbols below. It is important to respect the warnings.
Failure to respect the warnings could lead to electric shock, serious injury, burns, fire or damage to the appliance.

Danger Icon Danger!
Failure to observe the warning may result in life threatening injury by electric shock.
Warring Icon Important!
Failure to observe the warning could result in injury or damage to the appliance.
Danger of burns Icon Danger of burns!!
Failure to observe the warning could result in burns or scalds.
Note Icon Please note:
This symbol indicates recommendations and important information for the user.

Fundamental recommendations regarding safety

Dear Customer – The plug on this appliance will get ‘warm’ during use, this is perfectly normal. This product is A HIGH POWER HEATING APPLIANCE designed to our usual high standards but please make sure your wall sockets are in good condition and the plug is inserted correctly to avoid any accidental overheating. We suggest that you check the plug AND THE SOCKET regularly if the heater is in prolonged use, if you are in any doubt please consult an electrician.

SAFETY WARNINGS

Danger Icon Danger!
As the appliance operates using electricity, electric shocks can not be excluded.
Therefore, follow the safety recommendations given:

  • To avoid risk of cable overheating, extension leads must not be used in powering this appliance.
  • If the power cable is damaged, it must be replaced by the manufacturer or an authorized service center in order to eliminate all risk. Please contact Customer Experience, see enclosed guarantee.
  • Do not use the heater in a bathroom or in the vicinity of bathtubs, washbasins, showers or swimming pools.

Warring Icon Important!
The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

  • The heater must be positioned at least 50cm from furniture or other objects.
  • Do not use this appliance in rooms measuring less than 4m².
  • Do not place items over the radiator (such as to dry washing).
  • In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device such as a timer, or connected to a circuit that is regularly switched on and off by the utility

Danger of burns Icon Danger of burns!!
* Do not rest the power cable on hot elements.

Overheating WarringWARNING: In order to avoid overheating, never under any circumstances cover the appliances during operation, as this would lead to dangerous overheating.

Note Icon Please note:

  • The appliance must not be placed immediately under a fixed power socket.
  • Always use the radiator in the vertical position.
  • When you turn the appliance on for the first time, operate it at maximum for at least two hours.
  • It is normal for the appliance to make “creaking” noises when first turned on.
  • This appliance is filled with a precise quantity
    of oil and repairs requiring it to be opened must be carried out by the manufacturer or an authorized technical assistance center only. In the event of oil leaks, please contact Customer Experience, see enclosed guarantee.
  • As with any electrical appliance, whilst the instructions aim to cover as many eventualities as possible, caution and common sense should be applied when operating your appliance, particularly in the vicinity of young children.

Use in compliance with intended use
Use this heater only as described in this manual. All other use is considered improper. This appliance is not suitable for commercial use. The manufacturer is not liable for damage deriving from improper use of the appliance. This is a household appliance only. It is not intended to be used in:

  • staff kitchen areas in shops, offices and other working environments;
  • farm houses;
  • by clients in hotels, motels and other residential type environments;
  • bed and breakfast type environments.

Use in this manner will invalidate the manufacturers warranty.

Dustbin IconDisposing of the appliance
In compliance with European directive 2002/96/EC, the appliance must not be disposed of with household waste, but taken to an authorised waste separation and recycling centre.

 

Introduction
Thank you for choosing the TRD Oil Filled Radiator. We hope you enjoy using your new appliance. Take a few minutes to read these instructions. This will avoid all risks and damage to the appliance.

DESCRIPTION

Parts

The terminology below will be used repeatedly in the following pages.
A Thermostat
B Power selector
C/D/E Power indicator lights (MIN, MED, MAX)
F Timer
G Cord holder
H Wheel

USE

Fitting the wheels

Turn the radiator upside down on a rug or soft surface to prevent damaging the paint finish. Fully unfold the wheels by turning them outwards (Fig. 1). Turn the radiator back to its upright position.
Fitting the wheels

 

Caution
Always operate the heater in upright position only (wheels on the bottom, controls on top).
Any other position could create a hazardous situation.
Location
The heater should not be placed immediately below a power outlet. Do not use this radiator in rooms with a floor area of less than 4 m2 (43 sq. ft. ).
Connection

  • Before using the appliance check that your supply voltage is the same of that shown on the rating label of the unit and that the power socket and power supply line correspond to the load specified.
  • Check also the current capacity of your fuses. CONNECT YOUR HEATER TO EARTH PROVIDED SOCKET ONLY.
  • This appliance complies with directive 2004/108/ec on electromagnetic compatibility.

Keep loose clothing or bedding, furniture and flammable material away from the heater’s wall outlet.

Turning on

Insert the plug into an electrical outlet, rotate the thermostat knob to maximum and turn the unit on as follows using the power selector:

  • Turn the power selector to position MIN to select minimum output (the min light will be on).
  • Turn the power selector to position MED to select medium output (the min/med light will be on).
  • Turn the power selector to position MAX to select maximum output (the lights will be on).
Adjusting the thermostat

When the room has reached the * desired temperature, turn the thermostat knob slowly in an anti-clockwise direction until you hear a “click” and not beyond it. The thermostat will then adjust the set temperature automatically and keep it constant. If your unit is a three-output version, in intermediate seasons or on days when temperatures are not particularly cold, select minimum output to optimize savings and consumption.

Antifreeze function

Turn the thermostat dial to the position and the power selector to position MAX. The appliance will maintain a minimum room temperature of approximately 5°C, thus preventing freezing while conserving energy. In models that come with a timer, tabs must be set in the inward position.

Reminder

To completely shut the appliance off, turn the power selector to the “0” position and then unplug the appliance from the outlet.

UNITS WITH TIMER

How to use the timer

TIMER

To program heating, proceed as follows:

  • Look at the time on your clock or watch. If it is 10 p.m., turn the numbered timer disk clockwise until the number 22 (10 p.m.) on the disk coincides with the pointer Pointer (3) on the timer. Set the periods of time when you want the appliance to work by pushing the teeth (1) inward. Each tooth (1) corresponds to a period of 15 minutes.
    This will leave visible sectors which correspond to the periods of operation (2). When set, the radiator will operate automatically each day during the times programmed (important: the radiator must always be plugged into the socket).
  • To change the programming, move the teeth back into the initial position and set the new periods of operation.
  • To turn the appliance off completely, as well as turning the knob to the off position, you must also unplug it from the power outlet to avoid continued operation of the timer.

IMPORTANT: DO NOT ROTATE CLOCK DIAL COUNTERCLOCKWISE.
The timer is like an electric clock, and will only work when plugged into a power supply. When unplugged, the timer stops and must be later re-set.

Timer override

If you wish to override the timer settings, push the timer switch to position I (fig.2) manual (timer override). To return to timed operation push the switch back to the middle position (fig.2).
NOTE: if the timer switch is at the 0 position (fig. 2), the heater is off and will not operate).

Timer override

Safety device

A safety device shuts the radiator down in the case of overheating. To start the radiator up again, contact Customer Experience. See enclosed guarantee leaflet.

Maintenance and service/Troubleshooting

MAINTENANCE AND SERVICE

Always unplug the heater from the power outlet and allow the radiator to cool.
Wipe radiator with a soft damp cloth; do not use detergents or abrasives. Should the radiator not be in use over a certain length of time, wind the cord around the holder and store it in a dry place. This appliance has been built to last for many years of trouble-free service. In case of malfunction or doubt, do not try to repair the heater by yourself: this might increase the risk of fire and electric shock. Please refer to the enclosed guarantee leaflet for service and assistance details.

TROUBLESHOOTING

PROBLEM: CAUSE: SOLUTION

The appliance doesn’t work:

  • Be sure it is plugged in and that the electrical outlet is working.
  • Check for any obstruction.
  • The temperature may be set too low:
  • Plug into the power outlet.
  • Remove the obstruction and let the appliance cool down. If the appliance doesn’t work please contact Customer Experience.
  • Set the temperature to a higher position.

Electrical requirements

Before using this appliance ensure that the voltage indicated on the product corresponds with the main voltage in your home, if you are in any doubt about your supply contact your local electricity company.
The flexible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 13 amp capacity.
Should this plug not fit the socket outlets in your home, it should be cut off and replaced with a suitable plug, following the procedure outlined below.
Note: Such a plug cannot be used for any other appliance and should therefore be properly disposed of and not left where children might find it and plug it into a supply socket – with the obvious consequent danger.
Please note: We recommend the use of good quality plugs and wall sockets that can be switched off when the machine is not in use.
IMPORTANT: The wires in the mains lead fitted to this appliance are coloured in accordance with the following code:

Electrical requirements

As the colors of the wires in the mains lead of this appliance may not correspond with the colored markings identifying the terminals in your plug, proceed as follows:

  • The wire which is colored green and yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol Earth Symbolor colored green or green and yellow.
  • The wire which is colored blue must be connected to the terminal which is marked with the letter N or colored black.
  • The wire which is colored brown must be connected to the terminal which is marked with the letter L or colored red

When wiring the plug, ensure that all strands of wire are securely retained in each terminal. Do not forget to tighten the mains lead clamp on the plug. If your electricity supply point has only two pin socket outlets, or if you are in doubt, consult a qualified electrician.
Should the mains lead ever require replacement, it is essential that this operation be carried out by a qualified electrician and should only be replaced with a flexible cord of the same size.
After replacement of a fuse in the plug, the fuse cover must be refitted. If the fuse cover is lost, the plug must not be used until a replacement cover is obtained. The color of the correct replacement fuse cover is that of the colored insert in the base of the fuse recess or elsewhere on the plug. Always state this color when ordering a replacement fuse cover. Only 13 amp replacement fuses which are asta approved to B.S. 1362 should be fitted.
This appliance conforms to Norms EN 55014 regarding the suppression of radio interference.

Warning: this appliance must be earthed.

DOWNLOAD RESOURCES

FAQ’S

How long does the heater take to heat up?

It depends on the room size and the temperature outside. In a small room, it takes about 1 hour to heat up. In a large room, it will take about 3 hours to heat up.

How long does the heater work after being plugged in?

The heater will work for about 8 hours, depending on the room size and the temperature outside.

How hot is it?

The heater generates heat of between 60-65 degrees Celsius. This is just right for most households.

How many rooms can I heat at once?

You can heat up to 3 rooms at once, depending on the size of your rooms. If you have a small room, you can only use one heater. If you have a large room, you can use two or three heaters at once.

Is it safe to touch?

Yes, it is safe to touch when it is not hot (about 5 minutes after being turned off). You should not touch it when it is hot (about 5 minutes after being turned on).

Can I use this in my bathroom?

No! This product is not designed for use in bathrooms or other wet areas such as kitchens or laundry rooms. It may cause electric shock or fire if used in such areas.

How do I reset my Delonghi oil heater?

Take the front panel. And here is the reset button just pressed at once put everything back on put the power lid on and voil.

Why is my DeLonghi heater not working?

If the heater is not turning on, please consider the following suggestions: – make sure the unit is plugged in. – make sure the thermostat is set to the maximum setting. – make sure you choose and set the unit to the highest power setting.

Why does my DeLonghi heater keep turning off?

This unit is equipped with an alarm that goes off when unit is overheat. Please remove any obstruction from the unit. Unplug it and let it cool down.

How many watts does a Delonghi heater use?

Three Heat Settings: Choose between minimum (700-watts), medium (800-watts) or maximum heat (1,500-watts).

Can you refill a Delonghi heater?

The oil in our oil filled radiators is there for the life of the product. There is no need to change the oil or refill it.

How do you adjust the temperature on a DeLonghi heater?

Press the dial and the green light will flash. You can now choose which temperature to modify.

VIDEO

Delonghi-LOGO


Related Manuals