User Manual
JLab GO Air Earbuds User Manual
We love that you are rocking JLab Audio!
We take pride in our products and fully stand behind them.
YOUR SATISFACTION IS GUARANTEED
You may exchange or return merchandise within 30 days of the purchase date.
Learn more at jlabaudio.com/guarantee
YOUR WARRANTY
You may register your product at jlabaudio.com/register. All warranty claims are subject to JLab Audio
authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
Reach out to us at [email protected] or visit jlabaudio.com/contact.
BLUETOOTH PAIRING
Remove pull tab.
The charging case light will start pulsing blue.
Remove earbuds by pulling straight up or from side.
One earbud will blink blue/white indicating
3 ready to pair to your device.
Select “JLab GO Air” in your device’s
Bluetooth settings to connect.
Voice prompt “You’re connected” followed by
solid white lights will indicate you are connected.
ADDING NEW / ADDITIONAL BLUETOOTH DEVICES:
Turn OFF Bluetooth from any previously connected
device. Turn ON Bluetooth from new device.
Take earbuds out of the case.
Earbuds will automatically enter Bluetooth Pairing.
Select “JLab GO Air” in device settings to connect.
BUTTON FUNCTIONS
VOLUME DOWN: Single tap. | VOLUME UP: Single tap. |
VOICE PROMPTS
“Hello”: Power ON
“Ready to Pair”: GO Air is ready
to pair to Bluetooth device
“Bluetooth Connected”:
Earbud is connected to device
“Battery Full”: 100-75%
“Battery Medium”: 75-25%
“Low Battery”: Less than 25%
(When power decreases to 10%,
“Low Battery” will play one time)
“Goodbye”: Power OFF
CUSTOM EQ3 SOUND MODES
Tap either the right or left earbud 3 times for different EQ settings (GO Air will cycle 3 EQ settings).
CHARGING EARBUDS
Earbuds will power off when placed in the case
and first show charging case battery level.
Then pulsing blue light indicates earbuds are
2 charging and turns off when fully charged.
Earbuds will auto power on and connect
3 to your device when removed.
CHARGING CASE
Connect the GO Air into a
computer or USB 5V 1A
(or less) output device.
FITTING
QUICK TIPS
- The left or right earbud can be used independently for music and phone
calls. Simply choose one and take out of the case to connect. - Only ONE Bluetooth device can be connected at a time. Turn off
Bluetooth on unwanted devices and turn on Bluetooth on chosen
device to connect.
WARNING
Fully dry off the earbuds before
putting in the charging case to
avoid any damage to the case.
The earbuds are sweat/water
resistant but the case is not.
ENHANCE YOUR EXPERIENCE WITH THE JLAB AUDIO APP:
https://apps.apple.com/us/app/jlab-store-and-burn-in-tool/id1243023170
https://play.google.com/store/apps/details?id=co.tapcart.app.VMWtwhI4Hm&hl=en_US&gl=US
CAUTIONS
- Avoid extreme heat, cold, and humidity.
- Avoid dropping or crushing the earbuds.
- Wax may build up in the earbud tips, lowering the sound quality.
Carefully remove the wax with a cotton swab or other small tool to improve the sound quality. - If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
- If you experience regular discomfort while using this product, discontinue use and consult your physician.
- We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in safe location when not in use.
Read More About This Manual & Download PDF:
JLab GO Air Earbuds User Manual – Optimized PDF
JLab GO Air Earbuds User Manual – Original PDF
JBUDS AIR EARBUDS User Manual – Original PDF
JBUDS AIR EARBUDS V2 User Manual – Original PDF
JBUDS AIR EARBUDS User Manual – Original PDF
