TROUBLESHOOTING
GUIDE
1:10 SCALE
Kolegend RCCAR
TROUBLESHOOTING
| PROBLEM | SOLUTION |
| Scratched top | The RC car comes with aprotective plastic film that needs to be removed prior to using the car. |
| Steering not working properly |
|
| Reverse command not responding | When the car is moving forward in order to go in reverse please execute the following commands on the remote: first throttle push will bring the car to as top and in neutral mode. The second throttle push will make the cargo in reverse. (please refer to Transmitter Instructions in this User Manual) |
| Car going on its own and not responding correctly | Do not press any buttons on the remote control while pairing with the car because it will recognize that command every time. Rebind the remote and car and turn them on within 3 seconds so you reset the commands and car responds properly. |
| Car will not pair with the remote |
|
| Wheels are not spinning properly |
|
| Stripping sound upon accelerating |
|
| Battery/charger not working |
|
| Rebinding the remote control with the car | Turn on the remote control first and within 3 seconds turn on the car as well in order to rebind them; if not successful, repeat this action 2-3 times. If the pairing is still not successful, the remote and/or the ESC needs to be replaced. |
| The car shuts off when the remote is turned on | The servo had a short circuit and needs to be replaced. |
| Wheels come off the car while running |
|
