Dyson Airblade Wash Dry Hand Dryer Cleaning Instructions (+ PDF)

wash+dry

Contents hide

1 Cleaning guide

2 Clean the sensors

3 Clean the machine

4 Clean and check for blockages

5 Documents / Resources

5.1 References

6 Related Posts

Cleaning guide

To always get the best performance from the Dyson Airblade Wash+Dry hand dryer, it’s important to regularly clean it and check for blockages.

Clean the sensors

Wipe sensors using a soft cloth and non-abrasive cleaner then place a cleaning cap over sensors to prevent activation.

Clean the machine

Clean all tap surfaces, sink, mirror, and any walls or counter tops.
When complete REMEMBER to remove the cleaning cap.

Clean and check for blockages

REGULARLY clean air inlets on the base of the motor bucket (under the sink).
Ensure the plughole in the sink is free from blockages so water can drain freely.

What to use to clean the Dyson Airblade Wash+Dry hand dryer
Important: Do not pressure wash the Dyson Airblade Wash+Dry hand dryer.

Types of cleaning	How to clean	Do not use
Routine cleaning of light soiling and fingerprints.	A mild detergent is applied with a lint-free cloth to remove detergent residue with a damp cloth and tap water.	Solvent/oil-based mixes Alkali-bleach mixes
Stubborn marks and stains, oil and grease marks.	A mild detergent, alcohol or Quaternary ammonium solution, diluted to the manufacturer’s guidelines. Remove detergent residue with a damp cloth.	Foaming ingredients
Watermarks.	Water marks can be avoided by drying with a dry lint-free cloth.	Bleach or abrasive cleaners

For further information about Water supply cleanliness and bacteria growth, please refer to the Owner’s manual.