TURTLE BEACH STEALTH 600 GEN 2 User Guide

QUICK START GUIDE
IMPORTANT
READ BEFORE USING
Any questions?
turtlebeach.com/support
Model: Stealth™600 Gen 2 para

Contents hide

7 SYNCING YOUR HEADSET BUILT-IN XBOX WIRELESS)

8 Regulatory Compliance Statements for the Stealth™600X Gen 2

9 To access the rating label:

10 Documents / Resources

10.1 References

11 Related Posts

IMPORTANT

PLEASE MAKE SURE YOUR HEADSET IS UPDATED WITH THE LATEST FIRMWARE.

Connect to the Turtle Beach Audio Hub for Windows or Mac® to update the firmware.

turtlebeach.com/audiohub

https://es.turtlebeach.com/pages/audio-hub

A Stealth™ 600 Gen 2 Headset

B USB-C Charging CableHEADSET CONTROLS
Use Superhuman Hearing®Mode to pinpoint quiet audio cues like enemy footsteps and weapon reloads.
During gameplay, you can activate and deactivate Superhuman Hearing®by pressing the POWER button once, quickly.

Microphone Mute
Flip-up mic to mute. There is an audible tone when the mic is muted or unmuted.

EQ PRESETS
Signature Sound
Bass Boost
Bass + Treble Boost
Vocal Boost

SETUP FOR XBOX

For new Xbox console-setup instructions, go to:

turtlebeach.com/Xboxsetup

COMPATIBLE WITH
Xbox Series X
Xbox One
Windows 10 with Xbox Adapter, sold separately

SURROUND SOUND FOR XBOX (ONLY AVAILABLE ON XBOX)

Go to Settings > General > Volume & Audio Output
Set Headset Audio to Windows Sonic for Headphones

For updated setup instructions visit:
turtlebeach.com/sonic

CHARGING

The Stealth™600 Gen 2 gives you 15 hours of rechargeable battery life. Make sure to charge it regularly before storing it.

Headset Storage
Always charge your headset before storing it for an extended period of time (greater than 3 months). Never store the unit in temperatures above 113°F/45°C.

HEADSET LED

HEADSET LED	MEANING
Solid Green	Headset and Console Paired
Breathing Green	(While Charging) Battery Full
Double-Blink Green	Not Paired
Solid Red	(While Charging) Battery Charging
Breathing Red	Battery Low

SETUP FORPC USE

SYNCING YOUR HEADSET (XBOX WIRELESS ADAPTER)*

*Xbox Wireless Adapter not included

Headset volume is controlled through Windows 10 when used on a PC. Volume controls on the headset have no effect.

SYNCING YOUR HEADSET BUILT-IN XBOX WIRELESS)

On your PC, go to Settings > Devices > Connected Devices.
a. Choose to Add a device. Windows search for the headset.
Press the connect button on your headset. Windows finds and adds the headset.
When your Stealth™ 600 headset appears in the list under Other devices, it is ready to use.
Configuring your settings > On the Windows Taskbar, right-click the Speaker Icon, Select Playback Devices
a. Set TURTLE BEACH Stealth 600 ™ as your default device.
b. Select Recording Devices, Set TURTLE BEACH Stealth 600 ™as your default device.

Regulatory Compliance Statements for the Stealth™600X Gen 2

Local Restrictions on 802.11a, 802.11b, 802.11g and 802.11n Radio Usage
Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g, and 802.11n wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g, and 802.11n products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such.
To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the identification label of your device is listed in the manufacturer’s OEM Regulatory Guidance document at the following URL: http://www.turtlebeach.com/homologation or contact Turtle Beach directly.
Federal Communications Commission (FCC) Compliance Notices
This section includes the following FCC statements for the Stealth™600X Gen 2:

FCC ID: XGB-TB2315
Class B Interference Statement
RF Radiation Exposure & Hazard Warning
Non-Modification Statement
Unlicensed National Information Infrastructure Bands Operation Statement

Class B Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

his device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Radiation Exposure & Hazard Statement
To ensure compliance with FCC RF exposure requirements, this device must be installed in a location such that the antenna of the device will be greater than 2 cm (0.8 in.) from all persons. Using higher gain antennas and types of antennas not covered under the FCC certification of this product is not allowed. Installers of the radio and end-users of the product must adhere to the installation instructions provided in this manual. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

Non-Modification Statement
Use only the supplied internal antenna. Unauthorized antennas, modifications, or attachments could damage the Stealth™ 600X Gen 2 and violate FCC regulations. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Please contact Turtle Beach for a list of approved 2.4 GHz and 5.0 GHz antennas.

Unlicensed National Information Infrastructure (U-NII) Bands Operation Statement
Within the 5.25-5.35 GHz band, U-NII devices will be restricted to indoor operations to reduce any potential for harmful interference to co-channel MSS operations.
The U-NII devices shall accept any interference from legal communications and shall not interfere with the legal communications. If interference is caused, the user must stop operating the device immediately and cannot resume operation until the harmful interference is clear.
Manufacturers of U-NII devices are responsible for ensuring frequency stability such that emission is maintained within the band of operation under all conditions of normal operation as specified in this user manual.

Dynamic Frequency Selection (DFS)
U-NII devices operating in the 5.25-5.35 GHz and 5.47-5.725 GHz bands shall employ a DFS radar detection mechanism to detect the presence of radar systems and to avoid co-channel operation with radar systems in order to reduce the likelihood of interference to radar.
The modification of wireless broadband and other transceiver devices to operate on unauthorized frequencies or the disabling of DFS capabilities is a violation of FCC rules and may result in unlawful interference to radio communications services critical to public safety This product is compliant with the Consumer Product Safety Improvement Act of 2008, Public Law 110-314 (CPSIA)

Canadian ICES Statements IC: 3879A-2315 (Stealth™600X Gen 2)
This device complies with ICES-003 and RSS-247 of Industry Canada. Operation is subject to the following two conditions:

This device may not cause interference, and
This device must accept any interference, including interference that may cause undesired operation of the device.

To prevent radio interference to the licensed service (i.e. co-channel Mobile Satellite systems) this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing and not supported by Stealth™ 600X Gen 2 Models.

RF Radiation Exposure & Hazard Statement
To ensure compliance with RSS-102 RF exposure requirements, this device must be installed in a location such that the antenna of the device will be greater than 2 cm (0.8 in.) away from all persons. Using higher gain antennas and types of antennas not covered under the IC certification of this product is not allowed. Installers of the radio and end-users of the product must adhere to the installation instructions provided in this manual. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

Deployment Statement
This product is certified for indoor deployment only in the 5150-5250 MHz band. Do not install or use this product outdoors in that frequency band in Canada.

Operation in the Frequency Bands 5470-5725-MHz and 5725-5850-MHz
Until further notice, devices subject to this section shall not be capable of transmitting in the band from 5600-5650-MHz. This restriction is for the protection of Environment Canada’s weather radars operating in this band. Users are advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

European Union and European Fair Trade Association Regulatory Compliance
This equipment may be operated in the countries that comprise the member countries of the European Union and the European Fair Trade Association. These countries, listed below, are referred to as The European Community throughout this document:
AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND, FRANCE,, GERMANY, GREECE, HUNGARY,
IRELAND, ITALY, LATVIA, LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, ICELAND, LICHTENSTEIN, NORWAY, SWITZERLAND
Declaration of Conformity
Marking by this symbol:
indicates compliance with the Essential Requirements of the Radio Equipment Directive (RED) of the European Union (2014/53/EU). This equipment meets the following conformance standards:

Safety: EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 + A2: 2013 (T-Mark License),
EN 62368-1: 2014 + A11 (T-Mark License),
EN 50332-1: 2013, EN 50332-2: 2013, EN 71-3: 2013
Additional licenses issued for specific countries available on request

EMC:
EN 301 489-1 V2.1.1 (2017-02), EN 301 489-17 V3.1.1 (2016-11)
EN 61000-4-2: 2009, EN 61000-4-3: 2006 + A1: 2008 + A2: 2010, EN 61000-4-8: 2010
The products are licensed, as required, for additional country-specific standards for the International Marketplace. Additional issued licenses are available upon request.
Radio: EN 300 328 V2.1.2 (2019-07), EN 301 893 V2.1.1 (2017-05)
SAR: EN 62311: 2008
Environmental: RoHS 2015/863 amending Annex II to 2011/65/EU, WEEE 2012/19/EU, REACH 2006/1907/EC, Packaging 94/62/EC, Battery 2006/66/EC, Toys Safety Directive 2009/48/EC
Warning! This is a Class B product. In a domestic environment, this product may cause radio interference, in which case, the user may be required to take appropriate measures.
National Restrictions
Indoor Operation The Stealth™600X Gen 2 operates in the 5150 to 5350 MHz frequency band and is restricted to indoor use only! Antenna The Stealth™
600X Gen 2 has integrated antennas that cannot be replaced.
Power Level Control The Stealth™600X Gen 2 does not allow for customized power level control.
Operating Frequency The operating frequency of the Stealth™600X Gen 2 is determined by the host console system. As such, it is important that the host console system is correctly configured to meet the local regulations.
This symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to the designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.

Turtle Beach Europe Ltd is obligated as a producer with a main activity of selling under The Producer Responsibility Obligations (Packaging Waste) Regulations 2007. To fulfill our obligation we are registered with Comply Direct and their Recycling Room. Here you will find advice and information on packaging waste management, recycling symbols, and the waste hierarchy principles of reducing, reusing, and recycling.
https://www.complydirect.com/the-recycling-room/
Please visit the following URL for a complete copy of the Declaration of Conformity: http://www.turtlebeach.com/homologation
Mexican IFT-008 Compliance Statement

To access the rating label:

Remove the left ear pad by pulling the ear pad straight up using your thumb.
Once you’ve released the cloth from the lip on top, pull the earpad straight back and it should slip right off. To replace the ear pad, follow the same process in reverse.