AEROPEX Wireless Headphone User Manual - Manualsee

AEROPEX Wireless Headphone User Manual

AEROPEX Wireless Headphone User Manual

aeropex logo

User Guide

AEROPEX Wireless Headphone - Multifunction Button

AEROPEX Wireless Headphone - overview

How to Set Up Aeropex

Charge

Charge the headphones with the included magnetic charging cable. The LED indicator will turn from red to blue when charging is complete.

Pair

Start with your headphones powered off. Enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.

Connect

Open your device’s Bluetooth® menu and select “Aeropex by AfterShokz.” Audrey says “connected” and the LED indicator will flash blue one time.

Let us take care of you! We’ve got your back against defects.
Register your Aeropex at
register.aftershokz.com

AEROPEX Wireless Headphone - Button

Multifunction Button (A)

AEROPEX Wireless Headphone - Multifunction Button (A)

Volume+ / Power Button (B); Volume- Button (C)

AEROPEX Wireless Headphone - Volume- Button (C)

Specifications

AEROPEX Wireless Headphone - Specifications

AEROPEX Wireless Headphone - Specifications 2

LED Indicator

AEROPEX Wireless Headphone - LED Indicator

Multipoint Pairing

Multipoint pairing allows Aeropex to be connected to two devices at once, allowing users to seamlessly transition between the two.

  1. Start with your headphones powered off.
  2. Press and hold volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
  3. Press and hold the multifunction button and volume+ button for 3 seconds. Audrey says “multipoint enabled.”
  4. Open your first device’s Bluetooth® menu and select “Aeropex by AfterShokz.” Audrey says “connected”.
  5. Turn your headphones off.
  6. Re-enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
  7. Open your second device’s Bluetooth® menu and select “Aeropex by AfterShokz.” Audrey says “connected.”
  8. Turn your headphones off.
  9. Turn your headphones on. Your headphones are now connected to both devices.
  10. To turn multipoint pairing off: Press and hold the multifunction button and volume- button for 3 seconds. Audrey says “multipoint disabled.”

More information: bit.ly/ASMultipoint

Moisture Detected Alert

These headphones can detect liquid such as water, sweat, and rain. If the headphones are plugged into the charger while wet, the LED indicator will flash red and blue. The headphones will also vibrate and emit a beep. If this happens, remove the charging cable from the headphones, dry them completely and then proceed with charging.

How to Reset Your Headphones

  1. Start with your headphones powered off.
  2. Enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
  3. Press and hold the multifunction button, volume+ button and volume- button (all three buttons) simultaneously for 3-5 seconds, until you hear two beeps or feel vibrations.
  4. Turn your headphones off. Aeropex is now reset and can be re-paired to your device.

Optional Accessories

Earplugs (D)

Use with headphones in environments where it is safe to block out ambient noise, such as on a train or airplane.

  1. Roll earplugs firmly between fingers and place in ears.
  2. While music is playing to adjust EQ settings to reduce or enhance bass while wearing earplugs, press and hold volume+ and volume- buttons simultaneously.
  3. Switch EQ to original setting when you take out the earplugs.

Manufacturer

AfterShokz LLC
6057 Corporate Dr., East Syracuse, NY 13057

Aftershokz logo

Documents / Resources

AEROPEX Wireless Headphone [pdf] User Manual

References


Related Manuals