in sink erator BIO-CG Evolution Septic Assist Bio Charge Replacement Cartridge
INSTALLING AND REPLACING THE BIO-CHARGE® BOTTLE
Installing Bio-Charge® Bottle
Use only InSinkErator® Bio-Charge® septic assist bottles. Do not squeeze the Bio-Charge® Bottle; squeezing the bottle may cause Bio-Charge® to discharge and spill.
- Unscrew Bio-Charge® dispenser cap nozzle counterclockwise until nozzle pops upward to dispensing position. Do not remove dispenser cap nozzle.
- Align bottle with concave side toward disposer. IMPORTANT: Press septic assist bottle firmly into place. The bottle MUST be seated into the dispose housing for proper operation; there SHOULD NOT be a gap. (When installed correctly, the button on the disposer housing will be fully ejected.
- Release button. Pull bottle down slightly to ensure it is engaged.
Replacing Bio-Charge® Bottle
To keep your septic system operating at peak efficiency, replace the Bio-Charge® bottle when it is empty.
- Make sure disposer is off.
- Press button on disposer just above bottle and pull bottle down to remove it. (Do not refill or reuse empty bottle.)
