FANATEC CSL Pedals User Guide

Contents hide

1 FANATEC CSL Pedals

6 Documents / Resources

6.1 References

7 Related Posts

FANATEC CSL Pedals

PACKAGE CONTENTS

A. 1x CSL Pedals (2x Edge Protector 1.5 mm pre-installed)
B. 2x Hard Mount Spacer
C. 2x Edge Protector 2.5 mm (Adhesive Included)
D. 8x M4x12 mm Countersunk Mounting Bolts
E. 1x RJ12 Cable
F. 1x T20 Torx Key

For compatibility information, visit the product page on Fanatec.com.

PEDAL ADJUSTMENT

Use either the pre-installed 1.5 mm or 2.5 mm edge protectors (C) (including adhesive) when using the pedals on a floor.

HARD-MOUNTING

Hard-mount using all four mounting holes (bolts are not included).
Download drilling template from the product page on Fanatec.com.
M6x(22+X) mm

CONNECTIONS

Connect the brake pedal lever unit cable to the “Brake” port.
CSL Pedals Clutch Kit (Sold Separately).
Port only for Wheel Base or CSL Pedals Load Cell Kit.
ATTENTION: Connecting any other pedal or peripheral to this port may cause permanent damage!

ATTENTION

Update your wheel base firmware. You can obtain the latest driver from fanatec.com/downloads. Follow the instructions provided by the Driver & Firmware Instruction Manual which can be found on the product page.

NOTE: In order to update the firmware of this product, a PC is mandatory and PC mode must be active on the wheel base.

Documents / Resources

FANATEC CSL Pedals [pdf] User Guide
CSL Pedals